Formed Wire Products

 

 

 

 

 

---

Dead End Grips

Type 316 Stainless Steel

For use on Stainless Steel Strand

Catalog Number	Per Carton		Applied Length	Color Code	Rated Strength	Strand
	Unit	Wt. Lbs.				Size	Type
AG-907	100	53	26	Yellow	7,500	1/4	3W-7W
AG-908	100	58	27	Black	9,600	9/32	3W-7W
AG-909	50	41	31	Orange	11,500	5/16	3W-7W
AG-910	50	62	37	Green	16,200	3/8	3W-7W
AG-911	25	55	43	Red	24,000	7/16	3W-7W
AG-912	20	60	50	Blue	30,000	1/2	7W-19W
AG-913	10	50	60	Yellow	35,000	9/16	7W-19W
AG-914	10	67	65	Black	44,000	5/8	7W-19W

(Left Hand Lay)
*All dimensions in chart are in inches.

False Dead End Grips 

Type 316 Stainless Steel

For Stainless Steel Strand

False Dead-ends are a fast, safe and economical method for dead-ending strand. They are designed to be easily applied without any special tools, and because False Dead-ends are made from the same material as the strand, they will hold the same as the published rated breaking strength as the strand itself.

(Left Hand Lay)

*All Dimensions in chart are in inches

Catalog Number	Per Carton		Applied Length	Color Code	Strand
	Units	Wt. Lbs.			Size	Type
AG-907	25	17	26	YELLOW	1/4	3W-7W
AG-909	25	24	31	BLACK	5/16	3W-7W
AG-910	25	30	37	ORANGE	3/8	3W-7W
AG-911	25	52	43	GREEN	7/16	3W-7W
AG-912	25	71	50	BLUE	1/2	7W-19W

 

 

Strand Splice

For Use on Left Hand Lay Strand

Type 316 Stainless Steel Strand Splices
For use on Stainless Steel Strand 316

Catalog Number	Applications	Per Carton		Length	Subset	Rod Dia.	Color Code	Rated Strength	Strand
		Units	Wt. Lbs.						Size	Type	Mean Dia.
AS-907	1/4	50	40	38	4-4	.100	Yellow	7,000	1/4	3W	.259
										7W	.240
AS-908	9/32	50	50	40	3-3-3	.100	Black	10,000	9/32	7W	.279
AS-909	5/16	25	32	44	3-3-4	.100	Orange	12,000	5/16	3W	.312
										7W	.327
AS-910	3/8	25	50	53	4-4-3	.114	Green	17,000	3/8	3W	.356
										7W	.360
AS-911	7/16	20	50	60	3-4-4	.138	Red	23,000	7/16	7W	.435
AS-912	1/2	10	42	68	4-4-4	.138	Blue	29,000	1/2	7W	.495
										19W	.500
AS-913	9/16	10	60	80	4-4-4	.159	Yellow	37,000	9/16	7W	.564
										19W	.564

Strand Splice

Silicon Tin Bronze Strand Splices 

For use on Silicon Tin Bronze Messenger

Catalog Number	Applications	Per Carton		Length	Subset	Rod Dia	Color Code	Rated Strength	Strand
		Units	Wt. Lbs						Size	Type	Mean Dia.
AS-1007	1/4	50	40	38	4-4	.100	YELLOW	7000	1/4	3W	.259
										7W	.240
AS-1008	9/32	50	50	40	3-3-3	.100	BLACK	10000	9/32	7W	.279
AS-1009	5/16	25	32	44	3-3-4	.100	ORANGE	12000	5/16	3W	.312
										7W	.327
AS-1010	3/8	25	50	53	4-4-3	.114	GREEN	17000	3/8	3W	.356
										7W	.360
AS-1011	7/16	20	50	60	3-4-4	.138	RED	23000	7/16	7W	.435
AS-1012	1/2	10	42	68	4-4-4	.138	BLUE	29000	1/2	7W	.495
										19W	.500
AS-1013	9/16	10	60	80	4-4-4	.159	YELLOW	37000	9/16	7W	.564
										19W	.564

Lashing Rods

 

 

How to order
1. Calculate smallest circumscribing circle that will enclose the messenger and cable(s) by the formulas shown in Section 02-4
2. Select catalog number using diameter range column.

Materials:
Rod available in 316 Stainless & Bronze
Color Code – Identifies Size
General recommendations:
Lashing Rods are intended for use on messenger overhead cables. They are particularly adaptable to spans obstructed by trees or short spans over traffic intersections.

Size Selection:
In selecting the proper size lashing rod it is necessary to determine the smallest circumscribing circle that will enclose the messenger and cables.
For grouping only one cable with a messenger, add the diameters and multiply by a factor of .850.

For grouping two equal diameter cables, multiply the diameter of one cable times 2.00. Then to find the diameter of the maximum messenger that will fit in the interstices of the cables multiply the diameter of the cable by .666.

For grouping three equal diameter cables, multiply the diameter of one cable by 2.155. Then to find the diameter of the maximum messenger that will fit in the interstices of the cables multiply the diameter of one cable by .483.

For grouping four equal diameter cable, multiply the diameter of one cable by 2.414. Then to find the diameter of the maximum messenger that will fit in the interstices of the cable multiply the diameter of one cable by .414.

For grouping unequal diameter cables, or messenger too large to fit into the interstices above, the minimum diameter grouping can best be determined by a graphic layout to scale.

Application-Inspection:
The smaller inside diameter of the proper size lashing rod should exert a low radial pressure on the cables and messenger. For most installations, one lashing rod should be applied, overlapping one pitch length with each successive rod. Two lashing rods, applied 180 degrees apart are recommended when the cable messenger assembly weighs more than 8 pounds per foot, or at installations where the angles of sag exceed 20 degrees from the horizontal.

Lashing Rods
For use on: Stainless Steel Messenger Cables
(Not a stock item. Made to order only, also available in Bronze)

Catalog Number	Diameter Range (Inches)	Units Per Carton	Carton Weight (Lbs.)	Length (Ft.)	Rod Diameter (Inches)	Color Code
LR-400	.400-.439	100	13	5	0.86	Red
LR-440	.440-.489	100	13	5	0.86	White
LR-490	.490-.539	100	13	5	0.86	Orange
LR-540	.540-.599	100	13	5	0.86	Green
LR-600	.600-.669	100	17	5	.100	Yellow
LR-670	.670-.749	100	17	5	.100	White
LR-750	.750-.839	100	17	5	.100	Red
LR-840	.840-.939	100	17	5	.100	White
LR-940	.940-1.049	100	17	5	.100	Orange
LR-1050	1.050-1.169	100	24	5	.119	Green
LR-1170	1.170-1.309	100	24	5	.119	Yellow
LR-1310	1.310-1.459	100	24	5	.119	White
LR-1416	1.460-1.629	100	37	6	.138	Red
LR-1630	1.630-1.819	100	37	6	.138	White
LR-1820	1.820-2.039	100	37	6	.138	Orange
LR-2040	2.040-2.279	100	52	6	.159	Green
LR-2280	2.280-2.539	100	54	6	.159	Yellow
LR-2540	2.540-2.839	100	56	6	.159	White
LR-2840	2.840.3.179	100	58	6	.159	Red
LR-3180	3.180-3.559	50	34	6	.172	White
LR-3560	3.560-3.999	50	35	6	.172	Orange
LR-4000	4.000-4.479	50	36	6	.172	Green
LR-4480	4.480-4.999	50	37	6	.172	Yellow
LR-5000	5.000-5.599	50	38	6	.172	White
LR-5600	5.600-6.299	50	39	6	.172	Red

 

SaveSave

SaveSave

SaveSave