Lashing Wire

Lashing Wire

These stainless steel wires are intended for lashing aerial cable to messenger strand with standard commercial lashers such as Class C & Class D.

Part Number	Type	Material	Wire Dia. Inches	Nominal Coil		Avg. Break Strength (Lbs.)	Coils per Box	Approx. Ship Wgt. Per Box (Lbs.)
				Lbs.	*Feet
045SA430L	430	SS	.045	6.62	1200	125	6	40
061SA4301L-1	430	SS	.061	4.40	450	225	6	27
061SA4301L-2	430	SS	.061	6.30	650	225	6	38
065SA430L-1	430	SS	.065	5.10	450	250	6	31
065SA430L-2	430	SS	.065	7.30	650	250	6	44
038SA302L	302	SS	.038	6.29	1600	115	6	37
045SA302L	302	SS	.045	6.62	1200	165	6	40
061SA302L-1	302	SS	.061	4.40	450	290	6	27
061SA302L-2	302	SS	.061	6.30	650	290	6	38
065SA302L-1	302	SS	.065	5.10	450	335	6	31
06SA316L-2	302	SS	.065	7.30	650	335	6	44
038SA316L	316	SS	.038	6.29	1600	115	6	37
045SA316L	316	SS	.045	6.62	1200	165	6	40
061SA316L-1	316	SS	.061	4.40	450	290	6	27
061SA316L-2	316	SS	.061	6.30	650	290	6	38
065SA316L-1	316	SS	.065	5.10	450	335	6	31
065SA316L-2	316	SS	.065	7.30	650	335	6	44
045SA649C	649	Bronze	.045	6.62	1200	150	6	40
061SA649C	649	Bronze	.061	7.30	650	270	6	38

*Nominal footage of coils may vary by 30 Ft.

 

Warranty: Lashing wire is guaranteed against manufacturing defects. Defective products will be replaced or adjustments made provided we are notified promptly. We cannot be responsible for labor charges and our liability shall not exceed replacement cost to us.

Specifications: .045″ Type 430 is in accordance with Bell Telephone Laboratories Specifications AT-7153. All types are wax coated per AT-7153.

Chemistry:

Wires conform to AISI Type 430, 302 & 316 Stainless Steel or CDA 649 Silicon Tin Bronze.

	Maximum					Range
	C	MN	P	S	SJ	CR	NI	HO
Type 430 (UNS-S43000)	0.12	1.00	0.040	0.030	1.00	16.00/18.00
Type 302 (UNS-S30400)	0.08	2.00	0.040	0.030	1.00	18.00/20.00	s.oo! 10.50
Type 316 (UNS-S31600)	0.08	2.00	0.040	0.030	1.00	16.00/18.00	10.00/14.00	2.00/3.00

 

Silicon Tin Bronze Lashing Wire

Specifications: Aluminum spool for use with (K) style lashers
Physical Analysis

Part Number	Type	Material	Wire Dia. Inches	Nominal Spool		Avg. Break Strength (Lbs.)	Spools per Box	Approx. Ship Wgt. Per Box (Lbs.)
				Lbs.	*Feet
045SA649SP	649	Bronze	.045	6.62	1400	150	5	40
061SA649SP	649	Bronze	.061	7.30	750	270	5	40

Chemical Analysis

Copper	97.36 – 97.45%
Lead	.01%
Iron	.02%
Zinc	.01%
Tin	1.5%
Silicon	1.03 – 1.05%
Manganese	.01% (Less than)
Nickel	.01%
Aluminum	.01%

 

Lashing Wire Clamp

Material: Stainless Steel Type 304
Catalog Number: LWC-304SS

Material: CDA-655 Silicon Bronze
Catalog Number: LWC-655SB

Note: Studs are staked to prevent nuts from coming off during packaging or shipment.

Stainless Steel & Silicon Bronze Lashing Wire Clamp Specifications

1.) Scope:
This standard item is intended for use in conjunction with CSA Standard CAN/CSA-C83. This item is normally mounted on messenger strand and is used to terminate cable lashing.

2.) Assembly:
The lashing wire clamp comprises of two clamp sections, two flat washers and two hex. nuts assemblies on a shouldered stud. The stud will key into one clamp section at assembly to prevent stud rotation as the nuts are tightened. This keying feature is constructed as to allow proper closing of the jaws. Both ends of the stud are suitably modified after assembly to prevent loss of the nuts.

3.) Accommodation:
The clamp can accommodate a range of messenger strand from 3/16″ diameter to 9/16″ diameter designated strand size.

4.) Stud Strength:
The stud will withstand without fracture a torque of 10 N*m and 15 N*m for minimum reusable and ultimate torque strength.

5.) Slip Strength Test:
The clamp is assembled to a suitably anchored length of strand of designated strand size no. 5, CSA Standard CAN3-G 12, and the clamp nut is tightened to I 0 N*m torque. A force of I Kn. applied to the clamp parallel to the strand will cause less than 4mm movement between the clamp and strand.

6.) Classification of defects:

Class A	None
Class B	None
Class C	(i) Accommodation
	(ii) Slip Strength
	(iii) Stud Strength, Reusable
	(iv) Stud Strength, Ultimate
Class D	(i) Thread Fit
Class E	(i) Each Dimension
	(ii) All Visual (Total)