Material: Stainless Steel Type 316
Smooth, rounded pressed steel struts will not damage insulation when stringing secondaries. The curved back fits snugly to the pole with a 3-1/4” wide bearing surface. Mounting slots on the extended styles are for 5/8” bolts and are spaced so that the racks may be mounted on the opposite side of the pole from a pole mounted transformer using the same mounting bolts. The groove in the back will retain a 5/8” square nut permitting the rack to be installed over existing bolts without disturbing present installations. Insulators should be ordered separately.
Catalog Number (Less Insulators) |
Number Of Wires | Wire Spacing (Inches) | Overall Length (Inches) |
End Mounting Hole Spacing (Inches) |
Approximate Shipping Weight (Lbs per 100 pieces) |
SRIS-18 |
2 |
8 |
18 |
16 |
540 |
SRIS-18-11 |
3 |
4 |
18 |
16 |
540 |
SRIS-26 |
3 |
3 |
26 |
24 |
760 |
SRIS-34 |
3 |
12 |
34 |
32 |
980 |
SRIS34-1 |
4 |
8 |
34 |
32 |
980 |