{"id":57,"date":"2013-03-19T02:57:10","date_gmt":"2013-03-19T02:57:10","guid":{"rendered":"http:\/\/www.pwrmfg.com\/power-manufacturing\/poleline-hardware\/"},"modified":"2013-04-05T04:42:19","modified_gmt":"2013-04-05T04:42:19","slug":"poleline-hardware","status":"publish","type":"page","link":"http:\/\/www.pwrmfg.com\/power-manufacturing\/poleline-hardware\/","title":{"rendered":"Poleline Hardware"},"content":{"rendered":"

Anchor Rods<\/strong><\/h2>\n

Strand Eye (Stainless Steel Type 316)
\nRolled threads are furnished on all rods up to and including 3\/4″ diameter. One inch and larger threads. Length of threads 3 1\/2″. Manufactured to ANSI standards. All eyes shown to be furnished with one square nut.<\/p>\n

Please Note:
\nEYE RODS \/ EYE BOLTS:<\/strong> Eye Bolts and Anchor Rods will not look exactly like catalog drawings. Generally all eyes will be investment cast or forged tear drop oval eye or thimble eye shaped nuts attached to double end stud or rod and be a little larger than the minimum inside diameter stated in some catalogs. The eye opening widths for oval eyes work well and will accommodate most all suspension hanger bolt sizes.<\/p>\n

All anchor rods fabricated with double ended studs and eye nuts.
\n(Single, Double, or Triple eye)<\/p>\n

\"06-Poleline-Hardware-image-01\"<\/p>\n

Single Eye<\/strong><\/h3>\n\n\n\n\n\n\n\n
\n

Catalog Number<\/b><\/p>\n<\/td>\n

\n

Rod Diameter<\/b><\/p>\n<\/td>\n

\n

Minimum Strength (Lbs.)<\/b><\/p>\n<\/td>\n

\n

Length (Ft.)<\/b><\/p>\n<\/td>\n

\n

Approximate Weight<\/b><\/p>\n

(Lbs. per 100 pieces)<\/b><\/p>\n<\/td>\n

\n

Detail<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

AR1-126316<\/p>\n<\/td>\n

\n

1\/2<\/p>\n<\/td>\n

\n

10,000<\/p>\n<\/td>\n

\n

6<\/p>\n<\/td>\n

\n

450<\/p>\n<\/td>\n

\n

A<\/p>\n<\/td>\n<\/tr>\n

\n

AR1-586316<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

16,000<\/p>\n<\/td>\n

\n

6<\/p>\n<\/td>\n

\n

664<\/p>\n<\/td>\n

\n

A<\/p>\n<\/td>\n<\/tr>\n

\n

AR1-588316<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

16,000<\/p>\n<\/td>\n

\n

8<\/p>\n<\/td>\n

\n

830<\/p>\n<\/td>\n

\n

A<\/p>\n<\/td>\n<\/tr>\n

\n

AR1-348316<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

23,000<\/p>\n<\/td>\n

\n

8<\/p>\n<\/td>\n

\n

1,245<\/p>\n<\/td>\n

\n

A<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

<\/h3>\n

Double Eye<\/strong><\/h3>\n\n\n\n\n\n\n\n\n\n\n
\n

Catalog Number<\/b><\/p>\n<\/td>\n

\n

Rod Diameter<\/b><\/p>\n<\/td>\n

\n

Minimum Strength (Lbs.)<\/b><\/p>\n<\/td>\n

\n

Length (Ft.)<\/b><\/p>\n<\/td>\n

\n

Approximate Weight<\/b><\/p>\n

(Lbs. per 100 pieces)<\/b><\/p>\n<\/td>\n

\n

Detail<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

AR2-2586316<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

16,000<\/p>\n<\/td>\n

\n

6<\/p>\n<\/td>\n

\n

690<\/p>\n<\/td>\n

\n

B<\/p>\n<\/td>\n<\/tr>\n

\n

AR2-588316<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

16,000<\/p>\n<\/td>\n

\n

8<\/p>\n<\/td>\n

\n

840<\/p>\n<\/td>\n

\n

B<\/p>\n<\/td>\n<\/tr>\n

\n

AR2-346316<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

23,000<\/p>\n<\/td>\n

\n

6<\/p>\n<\/td>\n

\n

970<\/p>\n<\/td>\n

\n

B<\/p>\n<\/td>\n<\/tr>\n

\n

AR2-348316<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

23,000<\/p>\n<\/td>\n

\n

8<\/p>\n<\/td>\n

\n

1403<\/p>\n<\/td>\n

\n

B<\/p>\n<\/td>\n<\/tr>\n

\n

AR2-341316<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

23,000<\/p>\n<\/td>\n

\n

10<\/p>\n<\/td>\n

\n

1520<\/p>\n<\/td>\n

\n

B<\/p>\n<\/td>\n<\/tr>\n

\n

AR2-108316<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

36,000<\/p>\n<\/td>\n

\n

8<\/p>\n<\/td>\n

\n

2310<\/p>\n<\/td>\n

\n

B<\/p>\n<\/td>\n<\/tr>\n

\n

AR2-101316<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

36,000<\/p>\n<\/td>\n

\n

10<\/p>\n<\/td>\n

\n

2895<\/p>\n<\/td>\n

\n

B<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Triple Eye<\/strong><\/h3>\n\n\n\n\n\n\n\n
\n

Catalog Number<\/b><\/p>\n<\/td>\n

\n

Rod Diameter<\/b><\/p>\n<\/td>\n

\n

Minimum Strength (Lbs.)<\/b><\/p>\n<\/td>\n

\n

Length (Ft.)<\/b><\/p>\n<\/td>\n

\n

Approximate Weight<\/b><\/p>\n

(Lbs. per 100 pieces)<\/b><\/p>\n<\/td>\n

\n

Detail<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

AR3-348316<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

23,000<\/p>\n<\/td>\n

\n

8<\/p>\n<\/td>\n

\n

1,255<\/p>\n<\/td>\n

\n

C<\/p>\n<\/td>\n<\/tr>\n

\n

AR3-108316<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

36,000<\/p>\n<\/td>\n

\n

8<\/p>\n<\/td>\n

\n

2,310<\/p>\n<\/td>\n

\n

C<\/p>\n<\/td>\n<\/tr>\n

\n

AR3-101316<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

36,000<\/p>\n<\/td>\n

\n

10<\/p>\n<\/td>\n

\n

2,895<\/p>\n<\/td>\n

\n

C<\/p>\n<\/td>\n<\/tr>\n

\n

AR3-11410316<\/p>\n<\/td>\n

\n

1 1\/4<\/p>\n<\/td>\n

\n

58,000<\/p>\n<\/td>\n

\n

10<\/p>\n<\/td>\n

\n

4,620<\/p>\n<\/td>\n

\n

C<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Screw Anchor<\/strong><\/h2>\n

\"06-Poleline-Hardware-image-02\"<\/p>\n

\n\n\n\n\n\n
\n

Part<\/b><\/p>\n

Number<\/b><\/p>\n<\/td>\n

\n

Blade Diameter<\/b><\/p>\n<\/td>\n

\n

Rod Size<\/b><\/p>\n<\/td>\n

\n

Approx. Strength Dry Clay (Lbs.)<\/b><\/p>\n<\/td>\n

\n

Std. Pkg.<\/b><\/p>\n<\/td>\n

\n

Shipping wt. Lbs.\/100 pieces<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

SA-3456<\/p>\n<\/td>\n

\n

6<\/p>\n<\/td>\n

\n

3\/4\u201d x 5\u20196\u201d<\/p>\n<\/td>\n

\n

5,000<\/p>\n<\/td>\n

\n

5<\/p>\n<\/td>\n

\n

1,050<\/p>\n<\/td>\n<\/tr>\n

\n

SA-1056<\/p>\n<\/td>\n

\n

8<\/p>\n<\/td>\n

\n

1\u201d x 5\u20196\u201d<\/p>\n<\/td>\n

\n

8,000<\/p>\n<\/td>\n

\n

2<\/p>\n<\/td>\n

\n

8,000<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

*Material Stainless Steel Type 316
\n*Rod equipped with welded sharp stainless steel blades
\n*Large triple eye to take 1″ bar for hand installation
\n*Blade pitched to bite correctly into soil without undue earth disturbance
\n*Chisel point is provided to aid installation<\/p>\n

Rock Anchors<\/strong><\/h2>\n

Stainless Steel Type 316
\n(Complete with Rods)<\/strong>
\n\"06-Poleline-Hardware-image-03\"The rock anchor fits into a hole 1-7\/8″ or 2-3\/8″ and expands and wedges firmly against solid rock. When the anchor is expanded, the greater the pull on the rod, the harder the anchor becomes wedged. No lead, concrete, or grouting equipment is necessary. Furnished complete with 3\/4″ and 1″ in rods, 15″ to 8 ft. in length. When ordering galvanized steel parts replace the “6” with a “7” on the catalog number.<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Catalog Number<\/b><\/p>\n<\/td>\n

\n

Rod Dia. (Inches)<\/b><\/p>\n<\/td>\n

\n

Rod Length (Inches)<\/b><\/p>\n<\/td>\n

\n

Anchor Size Closed (Inches)<\/b><\/p>\n<\/td>\n

\n

Anchor Size Exposed (Inches)<\/b><\/p>\n<\/td>\n

\n

Hole Size (Inches)<\/b><\/p>\n<\/td>\n

\n

Approx. Weight (Lbs. Each)<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

RA-3415<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

15<\/p>\n<\/td>\n

\n

1 3\/4<\/p>\n<\/td>\n

\n

2 3\/8<\/p>\n<\/td>\n

\n

1 7\/8<\/p>\n<\/td>\n

\n

5<\/p>\n<\/td>\n<\/tr>\n

\n

RA-3430<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

30<\/p>\n<\/td>\n

\n

1 3\/4<\/p>\n<\/td>\n

\n

2 3\/8<\/p>\n<\/td>\n

\n

1 7\/8<\/p>\n<\/td>\n

\n

7<\/p>\n<\/td>\n<\/tr>\n

\n

RA-3453<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

53<\/p>\n<\/td>\n

\n

1 3\/4<\/p>\n<\/td>\n

\n

2 3\/8<\/p>\n<\/td>\n

\n

1 7\/8<\/p>\n<\/td>\n

\n

10<\/p>\n<\/td>\n<\/tr>\n

\n

RA-3460<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

60<\/p>\n<\/td>\n

\n

1 3\/4<\/p>\n<\/td>\n

\n

2 3\/8<\/p>\n<\/td>\n

\n

1 7\/8<\/p>\n<\/td>\n

\n

11<\/p>\n<\/td>\n<\/tr>\n

\n

RA-3472<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

72<\/p>\n<\/td>\n

\n

1 3\/4<\/p>\n<\/td>\n

\n

2 3\/8<\/p>\n<\/td>\n

\n

1 7\/8<\/p>\n<\/td>\n

\n

12<\/p>\n<\/td>\n<\/tr>\n

\n

RA-3484<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

84<\/p>\n<\/td>\n

\n

1 3\/4<\/p>\n<\/td>\n

\n

2 3\/8<\/p>\n<\/td>\n

\n

1 7\/8<\/p>\n<\/td>\n

\n

13<\/p>\n<\/td>\n<\/tr>\n

\n

RA-3496<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

96<\/p>\n<\/td>\n

\n

1 3\/4<\/p>\n<\/td>\n

\n

2 3\/8<\/p>\n<\/td>\n

\n

1 7\/8<\/p>\n<\/td>\n

\n

15<\/p>\n<\/td>\n<\/tr>\n

\n

RA-1015<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

15<\/p>\n<\/td>\n

\n

2 1\/4<\/p>\n<\/td>\n

\n

3 1\/8<\/p>\n<\/td>\n

\n

2 3\/8<\/p>\n<\/td>\n

\n

10<\/p>\n<\/td>\n<\/tr>\n

\n

RA-1030<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

30<\/p>\n<\/td>\n

\n

2 1\/4<\/p>\n<\/td>\n

\n

3 1\/8<\/p>\n<\/td>\n

\n

2 3\/8<\/p>\n<\/td>\n

\n

14<\/p>\n<\/td>\n<\/tr>\n

\n

RA-1053<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

43<\/p>\n<\/td>\n

\n

2 1\/4<\/p>\n<\/td>\n

\n

3 1\/8<\/p>\n<\/td>\n

\n

2 3\/8<\/p>\n<\/td>\n

\n

18<\/p>\n<\/td>\n<\/tr>\n

\n

RA-1072<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

72<\/p>\n<\/td>\n

\n

2 1\/4<\/p>\n<\/td>\n

\n

3 1\/8<\/p>\n<\/td>\n

\n

2 3\/8<\/p>\n<\/td>\n

\n

24<\/p>\n<\/td>\n<\/tr>\n

\n

RA-1084<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

84<\/p>\n<\/td>\n

\n

2 1\/4<\/p>\n<\/td>\n

\n

3 1\/8<\/p>\n<\/td>\n

\n

2 3\/8<\/p>\n<\/td>\n

\n

26<\/p>\n<\/td>\n<\/tr>\n

\n

RA-1096<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

96<\/p>\n<\/td>\n

\n

2 1\/4<\/p>\n<\/td>\n

\n

3 1\/8<\/p>\n<\/td>\n

\n

2 3\/8<\/p>\n<\/td>\n

\n

29<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Rock Anchor Extension<\/strong><\/h2>\n

\"06-Poleline-Hardware-image-04\"<\/p>\n

\n\n\n\n\n\n\n\n
\n

Part<\/b><\/p>\n

Number<\/b><\/p>\n<\/td>\n

\n

Rod Diameter<\/b><\/p>\n<\/td>\n

\n

Length<\/b><\/p>\n<\/td>\n

\n

Load (Lbs.)<\/b><\/p>\n<\/td>\n

\n

Shipping wt. Lbs.\/100 Pieces<\/b><\/p>\n<\/td>\n

\n

Std. Pkg.<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

RAE-583<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

3\u2019-0\u201d<\/p>\n<\/td>\n

\n

12,500<\/p>\n<\/td>\n

\n

500<\/p>\n<\/td>\n

\n

10<\/p>\n<\/td>\n<\/tr>\n

\n

RAE-343<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

3\u2019-0\u201d<\/p>\n<\/td>\n

\n

18,500<\/p>\n<\/td>\n

\n

750<\/p>\n<\/td>\n

\n

10<\/p>\n<\/td>\n<\/tr>\n

\n

RAE-344<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

4\u2019-0\u201d<\/p>\n<\/td>\n

\n

18,500<\/p>\n<\/td>\n

\n

850<\/p>\n<\/td>\n

\n

5<\/p>\n<\/td>\n<\/tr>\n

\n

RAE-345<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

5\u2019-0\u201d<\/p>\n<\/td>\n

\n

18,500<\/p>\n<\/td>\n

\n

1,000<\/p>\n<\/td>\n

\n

5<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

 <\/p>\n

*Stainless Steel Type 316
\n*C.S.A. Standard
\n*Safety bolts 3\/4″ x 4-1\/2″ included
\n* Used where rock formation is near surface
\n*Drop forged with the clevis swedged to rod
\n*Double thimble eye for one of two guy strand wires<\/p>\n

 <\/p>\n

Thimble Eye Nuts (PISA)<\/strong><\/h2>\n

\"06-Poleline-Hardware-image-05\"<\/p>\n\n\n\n\n\n\n\n
\n

Size (Inches<\/b><\/p>\n<\/td>\n

\n

Part Numbers<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

Single Eye<\/b><\/p>\n<\/td>\n

\n

Double Eye<\/b><\/p>\n<\/td>\n

\n

Triple Eye<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

5\/8\u201d (5\/8\u201d Rod)<\/p>\n<\/td>\n

\n

TEN58SS<\/p>\n<\/td>\n

\n

DTEN58SS<\/p>\n<\/td>\n

\n

TTEN58SS<\/p>\n<\/td>\n<\/tr>\n

\n

1\u201d (3\/4\u201d & 1\u201d Rod)<\/p>\n<\/td>\n

\n

TEN100SS<\/p>\n<\/td>\n

\n

DTEN341SS<\/p>\n<\/td>\n

\n

TTEN341SS<\/p>\n<\/td>\n<\/tr>\n

\n

1 1\/4\u201d<\/p>\n<\/td>\n

\n

—<\/p>\n<\/td>\n

\n

—<\/p>\n<\/td>\n

\n

TTEN114SS<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Extension Rods (PISA)<\/strong><\/h2>\n

Material: 316 Stainless Steel<\/strong><\/p>\n

\"06-Poleline-Hardware-image-06\"<\/p>\n\n\n\n\n\n\n\n\n\n\n
\n

Part Number<\/b><\/p>\n<\/td>\n

\n

Rod Size<\/b><\/p>\n<\/td>\n

\n

Thread<\/b><\/p>\n

Diameter<\/b><\/p>\n<\/td>\n

\n

Std.<\/b><\/p>\n

Packaging<\/b><\/p>\n<\/td>\n

\n

Shipping Wgt.<\/b><\/p>\n

Lbs.\/100 pieces<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

Dia.<\/b><\/p>\n<\/td>\n

\n

Length<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

PER-5870<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

7\u2019-0\u201d<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

10<\/p>\n<\/td>\n

\n

750<\/p>\n<\/td>\n<\/tr>\n

\n

PER-3470<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

7\u2019-0\u201d<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

10<\/p>\n<\/td>\n

\n

1085<\/p>\n<\/td>\n<\/tr>\n

\n

PER-1070<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

7\u2019-0\u201d<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

5<\/p>\n<\/td>\n

\n

1875<\/p>\n<\/td>\n<\/tr>\n

\n

PER-5836<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

3\u2019-6\u201d<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

10<\/p>\n<\/td>\n

\n

400<\/p>\n<\/td>\n<\/tr>\n

\n

PER-3436<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

3\u2019-6\u201d<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

10<\/p>\n<\/td>\n

\n

585<\/p>\n<\/td>\n<\/tr>\n

\n

PER-1036<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

3\u2019-6\u201d<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

5<\/p>\n<\/td>\n

\n

985<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

 <\/p>\n

Anchor Rods<\/strong><\/h2>\n

Multi Helix Square Shaft Anchors, Triple Helix<\/strong><\/h3>\n

Material: Type 316 & 17-4PH Stainless Steel
\n<\/strong><\/p>\n

\"06-Poleline-Hardware-image-07\"<\/p>\n\n\n\n\n\n
\n

Helixes<\/b><\/p>\n<\/td>\n

\n

Catalog Number<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

8\u201d, 10\u201d, & 12\u201d<\/p>\n<\/td>\n

\n

THAT-316SS<\/p>\n<\/td>\n<\/tr>\n

\n

Three 10\u201d<\/p>\n<\/td>\n

\n

THMA-10T-316SS<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Anchor Shaft Extensions<\/strong><\/h2>\n

\"06-Poleline-Hardware-image-08\"<\/p>\n\n\n\n\n\n\n\n\n
\n

Anchor Shaft Extensions<\/b><\/p>\n

1-1\/2\u201d Square with Upset Coupling<\/b><\/p>\n

And High Strength Bolt<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

Catalog Number<\/p>\n<\/td>\n

\n

Length (Feet)<\/p>\n<\/td>\n<\/tr>\n

\n

ASE-3.5-316SS<\/p>\n<\/td>\n

\n

3.5<\/p>\n<\/td>\n<\/tr>\n

\n

ASE-50-316SS<\/p>\n<\/td>\n

\n

5<\/p>\n<\/td>\n<\/tr>\n

\n

ASE-70-316SS<\/p>\n<\/td>\n

\n

7<\/p>\n<\/td>\n<\/tr>\n

\n

ASE-100-316SS<\/p>\n<\/td>\n

\n

10<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Extension Coupler<\/strong><\/h2>\n

\"06-Poleline-Hardware-image-09\"<\/p>\n\n\n\n\n
\n

Extension Coupler
\nCast 17-4 PH Stainless<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

Catalog Number (THAEC1-316SS)<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Guy Attachment<\/strong><\/h2>\n

with High Strength Bolt
\nMaterial: 316 Stainless Steel<\/strong><\/p>\n

\"06-Poleline-Hardware-image-10\"<\/p>\n\n\n\n\n
\n

Catalog Number<\/b><\/p>\n<\/td>\n

\n

Description<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

GAU-3316SS<\/p>\n<\/td>\n

\n

Triple Eye With Upset Coupling<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Note:
\nAbove for 1-1\/2″ square and 1-1\/4″ round, may be used with single double guys.<\/p>\n

 <\/p>\n

Guy Attachments<\/strong><\/h2>\n

Material: Stainless Steel Type 316 of Silicon Bronze
\nAngle guy attachments are made of flat stainless steel. The strand bearing surface is rounded to provide protection to the strand without the use of a guy thimble.<\/strong><\/p>\n

\"06-Poleline-Hardware-image-11\"<\/p>\n

 <\/p>\n

Guy Hooks:<\/strong><\/h2>\n

Made from half oval steel bent with flat side toward pole, the rounded side prevents injury to the guy strand.<\/p>\n

Material: Type 316 Stainless Steel<\/strong><\/p>\n\n\n\n\n\n\n\n\n
\n

Catalog Number<\/b><\/p>\n<\/td>\n

\n

Detail Letter<\/b><\/p>\n<\/td>\n

\n

Description<\/b><\/p>\n<\/td>\n

\n

Dimensions (inches)<\/b><\/p>\n<\/td>\n

\n

Approx. Wt.<\/b><\/p>\n

Lbs.\/100 Pieces<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

Bolt Hole<\/b><\/p>\n<\/td>\n

\n

Size<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

AGA158SS<\/p>\n<\/td>\n

\n

A<\/p>\n<\/td>\n

\n

1-Bolt Type<\/p>\n<\/td>\n

\n

11\/16<\/p>\n<\/td>\n

\n

1\/4x2x4 1\/8<\/p>\n<\/td>\n

\n

114<\/p>\n<\/td>\n<\/tr>\n

\n

AGA134SS<\/p>\n<\/td>\n

\n

A<\/p>\n<\/td>\n

\n

1-Bolt Type<\/p>\n<\/td>\n

\n

13\/16<\/p>\n<\/td>\n

\n

1\/4x2x4 1\/8<\/p>\n<\/td>\n

\n

114<\/p>\n<\/td>\n<\/tr>\n

\n

AGA20SS<\/p>\n<\/td>\n

\n

B<\/p>\n<\/td>\n

\n

2-Bolt Type<\/p>\n<\/td>\n

\n

9\/16-13\/16<\/p>\n<\/td>\n

\n

1\/4x2x7 1\/4<\/p>\n<\/td>\n

\n

150<\/p>\n<\/td>\n<\/tr>\n

\n

AJH1SS<\/p>\n<\/td>\n

\n

C<\/p>\n<\/td>\n

\n

1-Bolt Type<\/p>\n<\/td>\n

\n

11\/16<\/p>\n<\/td>\n

\n

3\/8x2x4<\/p>\n<\/td>\n

\n

90<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Material: Silicon Bronze<\/strong><\/p>\n\n\n\n\n\n\n\n\n
\n

Catalog Number<\/b><\/p>\n<\/td>\n

\n

Detail Letter<\/b><\/p>\n<\/td>\n

\n

Description<\/b><\/p>\n<\/td>\n

\n

Dimensions (inches)<\/b><\/p>\n<\/td>\n

\n

Approx. Wt.<\/b><\/p>\n

Lbs.\/100 Pieces<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

Bolt Hole<\/b><\/p>\n<\/td>\n

\n

Size<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

AGA158SB<\/p>\n<\/td>\n

\n

A<\/p>\n<\/td>\n

\n

1-Bolt Type<\/p>\n<\/td>\n

\n

11\/16<\/p>\n<\/td>\n

\n

1\/4x2x4 1\/8<\/p>\n<\/td>\n

\n

114<\/p>\n<\/td>\n<\/tr>\n

\n

AGA134SB<\/p>\n<\/td>\n

\n

A<\/p>\n<\/td>\n

\n

1-Bolt Type<\/p>\n<\/td>\n

\n

13\/16<\/p>\n<\/td>\n

\n

1\/4x2x4 1\/8<\/p>\n<\/td>\n

\n

114<\/p>\n<\/td>\n<\/tr>\n

\n

AGA20SB<\/p>\n<\/td>\n

\n

B<\/p>\n<\/td>\n

\n

2-Bolt Type<\/p>\n<\/td>\n

\n

9\/16-13\/16<\/p>\n<\/td>\n

\n

1\/4x2x7 1\/4<\/p>\n<\/td>\n

\n

150<\/p>\n<\/td>\n<\/tr>\n

\n

AJH1SB<\/p>\n<\/td>\n

\n

C<\/p>\n<\/td>\n

\n

1-Bolt Type<\/p>\n<\/td>\n

\n

11\/16<\/p>\n<\/td>\n

\n

3\/8x2x4<\/p>\n<\/td>\n

\n

90<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Guy Hook Span Type<\/strong><\/h2>\n

For guy attachment use at angles 0 to 30 degrees from horizontal
\nMaterial: Stainless Steel Type 316<\/p>\n

\"06-Poleline-Hardware-image-12\"<\/p>\n\n\n\n\n\n\n\n
\n

Part Number<\/b><\/p>\n<\/td>\n

\n

Max Thru<\/b><\/p>\n

Bolt Diameter<\/b><\/p>\n<\/td>\n

\n

Max Guy Strand Diameter<\/b><\/p>\n<\/td>\n

\n

Approx. Ship Wgt.<\/b><\/p>\n

Lbs.\/100 Pieces<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

GHST58-T<\/p>\n<\/td>\n

\n

5\/8\u201d<\/p>\n<\/td>\n

\n

1\/2<\/p>\n<\/td>\n

\n

66<\/p>\n<\/td>\n<\/tr>\n

\n

GHST58-T<\/p>\n<\/td>\n

\n

Tapped 5\/8-11<\/p>\n<\/td>\n

\n

1\/2<\/p>\n<\/td>\n

\n

75<\/p>\n<\/td>\n<\/tr>\n

\n

GHST34-T<\/p>\n<\/td>\n

\n

3\/4\u201d<\/p>\n<\/td>\n

\n

1\/2<\/p>\n<\/td>\n

\n

64<\/p>\n<\/td>\n<\/tr>\n

\n

GHST34-T<\/p>\n<\/td>\n

\n

Tapped \u00be-10<\/p>\n<\/td>\n

\n

1\/2<\/p>\n<\/td>\n

\n

73<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Ball Clevis<\/strong><\/h2>\n

Specifications:
\nMaterial: AISI Type 316 Stainless Steel
\nClevis pin, bent clevis bolt and nut, AISI Type 316 Stainless Steel
\nCotter pin: Stainless Steel<\/strong><\/p>\n

\"06-Poleline-Hardware-image-13\"<\/p>\n

Number: BC-30M-SS316
\nUltimate Breaking Strength<\/em>: 30,000
\nInsulator Class: ASA 52 3 & 5
\nDimensions: A = 1 15\/16
\nB = 1 9\/16
\nC = 13\/16
\nD = 1 11\/16
\nE = 5\/8<\/p>\n

Weight (Lbs.\/C) = 110<\/p>\n

 <\/p>\n

Socket Eye<\/strong><\/h2>\n

Catalog Number: SE-30M-SS316
\nSpecifications:
\nMaterial: Body – AISI Stainless Steel Type 316
\nCotter Pin: Stainless Steel
\nNote: Cotter pin included with each socket eye
\nUltimate Breaking Strength: 30,000 (Lbs.)
\nApprox. Weight (Lbs., each): 1.40<\/strong><\/p>\n

\"06-Poleline-Hardware-image-14\"<\/p>\n

Eye Nut, Weldless<\/strong><\/h2>\n

Material: Type 316 Stainless Steel or Type 655 Silicon Bronze
\n(See chart below for description)<\/p>\n

\"06-Poleline-Hardware-image-15\"<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Catalog Number<\/b><\/p>\n<\/td>\n

\n

Rod Size A<\/b><\/p>\n<\/td>\n

\n

Size Number<\/b><\/p>\n<\/td>\n

\n

WLL Rated Load<\/b><\/p>\n<\/td>\n

\n

Rod Take-Out<\/b><\/p>\n<\/td>\n

\n

Max Pin Dia. C<\/b><\/p>\n<\/td>\n

\n

D<\/b><\/p>\n<\/td>\n

\n

E<\/b><\/p>\n<\/td>\n

\n

G<\/b><\/p>\n<\/td>\n

\n

Weight per 100<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

316 Type<\/b><\/p>\n<\/td>\n

\n

655 Type<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

OEN-38SS<\/p>\n<\/td>\n

\n

OEN-38SB<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

1250<\/p>\n<\/td>\n

\n

1 1\/2<\/p>\n<\/td>\n

\n

1 3\/16<\/p>\n<\/td>\n

\n

1\/2<\/p>\n<\/td>\n

\n

2<\/p>\n<\/td>\n

\n

11\/16<\/p>\n<\/td>\n

\n

63<\/p>\n<\/td>\n<\/tr>\n

\n

OEN-12SS<\/p>\n<\/td>\n

\n

OEN-12SB<\/p>\n<\/td>\n

\n

1\/2<\/p>\n<\/td>\n

\n

2100<\/p>\n<\/td>\n

\n

63<\/p>\n<\/td>\n<\/tr>\n

\n

OEN-58SS<\/p>\n<\/td>\n

\n

OEN-58SB<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

3600<\/p>\n<\/td>\n

\n

62<\/p>\n<\/td>\n<\/tr>\n

\n

OEN-34SS<\/p>\n<\/td>\n

\n

OEN-34SB<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

5200<\/p>\n<\/td>\n

\n

60<\/p>\n<\/td>\n<\/tr>\n

\n

OEN-78SS<\/p>\n<\/td>\n

\n

OEN-78SB<\/p>\n<\/td>\n

\n

7\/8<\/p>\n<\/td>\n

\n

2<\/p>\n<\/td>\n

\n

7200<\/p>\n<\/td>\n

\n

2<\/p>\n<\/td>\n

\n

1 5\/8<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

2 5\/8<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

170<\/p>\n<\/td>\n<\/tr>\n

\n

OEN-10SS<\/p>\n<\/td>\n

\n

OEN-10SB<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

9500<\/p>\n<\/td>\n<\/tr>\n

\n

OEN-144SS<\/p>\n<\/td>\n

\n

OEN-144SB<\/p>\n<\/td>\n

\n

1\/1\/4<\/p>\n<\/td>\n

\n

3<\/p>\n<\/td>\n

\n

12,480<\/p>\n<\/td>\n

\n

2 1\/2<\/p>\n

\n<\/td>\n

\n

1 3\/4<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

3 3\/8<\/p>\n<\/td>\n

\n

1 1\/4<\/p>\n<\/td>\n

\n

364<\/p>\n<\/td>\n<\/tr>\n

\n

OEN-112SS<\/p>\n<\/td>\n

\n

OEN-112SB<\/p>\n<\/td>\n

\n

1 1\/2<\/p>\n<\/td>\n

\n

15,400<\/p>\n<\/td>\n

\n

345<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Note: Working load limit for straight line pull only.
\nNote: Do not exceed working load limit.<\/p>\n

 <\/p>\n

Shackles<\/strong><\/h2>\n

Anchor Shackle<\/strong><\/h2>\n

\"06-Poleline-Hardware-image-16\"Catalog Number: AS-1.0-SL-SS316
\nSpecifications:
\nMaterial: AISI Type 316 Stainless Steel
\nClevis Pin: AISI Type 316 Stainless Steel
\nUltimate Breaking Strength: 60,000 Lbs.
\nDimensions in inches A = 3 1\/2
\nB = 3\/4
\nC = 1 1\/4
\nE = 3\/4
\nF = 1 7\/8
\nG = 1
\nWeight (Lbs.\/C) = 242<\/p>\n

 <\/p>\n

Screw Pin, Safety Pin<\/strong><\/h2>\n

Specifications:
\nMaterial: Type 316 Stainless Steel
\nNote: Larger sizes, chain shackles, other pin styles
\nand stainless grades can be furnished on special order.<\/p>\n

\"06-Poleline-Hardware-image-17\"<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Size \u201cA\u201d<\/b><\/p>\n<\/td>\n

\n

Catalog Number<\/b><\/p>\n<\/td>\n

\n

Dimensions (Inches)<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

Screw Pin<\/b><\/p>\n<\/td>\n

\n

Safety Pin<\/b><\/p>\n<\/td>\n

\n

\u201cB\u201d<\/b><\/p>\n<\/td>\n

\n

\u201cC\u201d<\/b><\/p>\n<\/td>\n

\n

\u201cD\u201d<\/b><\/p>\n<\/td>\n

\n

\u201cE\u201d<\/b><\/p>\n<\/td>\n

\n

\u201cF\u201d<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

1\/4<\/p>\n<\/td>\n

\n

SPAS140<\/p>\n<\/td>\n

\n

SPNAS140<\/p>\n<\/td>\n

\n

5\/16<\/p>\n<\/td>\n

\n

1 1\/8<\/p>\n<\/td>\n

\n

1\/2<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

11\/16<\/p>\n<\/td>\n<\/tr>\n

\n

5\/16<\/p>\n<\/td>\n

\n

SPAS516<\/p>\n<\/td>\n

\n

SPNAS516<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n

\n

1 1\/4<\/p>\n<\/td>\n

\n

17\/32<\/p>\n<\/td>\n

\n

27\/32<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n<\/tr>\n

\n

3\/8<\/p>\n<\/td>\n

\n

SPAS380<\/p>\n<\/td>\n

\n

SPNAS380<\/p>\n<\/td>\n

\n

7\/16<\/p>\n<\/td>\n

\n

1 7\/16<\/p>\n<\/td>\n

\n

21\/32<\/p>\n<\/td>\n

\n

31\/32<\/p>\n<\/td>\n

\n

15\/16<\/p>\n<\/td>\n<\/tr>\n

\n

7\/16<\/p>\n<\/td>\n

\n

SPAS716<\/p>\n<\/td>\n

\n

SPNAS716<\/p>\n<\/td>\n

\n

1\/2<\/p>\n<\/td>\n

\n

1 3\/4<\/p>\n<\/td>\n

\n

23\/32<\/p>\n<\/td>\n

\n

1 5\/32<\/p>\n<\/td>\n

\n

1 1\/8<\/p>\n<\/td>\n<\/tr>\n

\n

1\/2<\/p>\n<\/td>\n

\n

SPAS120<\/p>\n<\/td>\n

\n

SPNAS120<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

1 15\/16<\/p>\n<\/td>\n

\n

13\/16<\/p>\n<\/td>\n

\n

1 1\/4<\/p>\n<\/td>\n

\n

1 1\/4<\/p>\n<\/td>\n<\/tr>\n

\n

5\/8<\/p>\n<\/td>\n

\n

SPAS580<\/p>\n<\/td>\n

\n

SPNAS580<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

2 7\/16<\/p>\n<\/td>\n

\n

1 1\/16<\/p>\n<\/td>\n

\n

1 9\/16<\/p>\n<\/td>\n

\n

1 7\/16<\/p>\n<\/td>\n<\/tr>\n

\n

3\/4<\/p>\n<\/td>\n

\n

SPAS340<\/p>\n<\/td>\n

\n

SPNAS340<\/p>\n<\/td>\n

\n

7\/8<\/p>\n<\/td>\n

\n

3<\/p>\n<\/td>\n

\n

1 1\/4<\/p>\n<\/td>\n

\n

1 7\/8<\/p>\n<\/td>\n

\n

1 7\/8<\/p>\n<\/td>\n<\/tr>\n

\n

7\/8<\/p>\n<\/td>\n

\n

SPAS780<\/p>\n<\/td>\n

\n

SPNAS780<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

3 1\/4<\/p>\n<\/td>\n

\n

1 7\/16<\/p>\n<\/td>\n

\n

2 1\/8<\/p>\n<\/td>\n

\n

2<\/p>\n<\/td>\n<\/tr>\n

\n

1<\/p>\n<\/td>\n

\n

SPAS100<\/p>\n<\/td>\n

\n

SPNAS100<\/p>\n<\/td>\n

\n

1 1\/8<\/p>\n<\/td>\n

\n

3 3\/4<\/p>\n<\/td>\n

\n

1 11\/16<\/p>\n<\/td>\n

\n

2 1\/2<\/p>\n<\/td>\n

\n

2 3\/8<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Size \u201cA\u201d<\/b><\/p>\n<\/td>\n

\n

Catalog Number<\/b><\/p>\n<\/td>\n

\n

Tolerance +\/-<\/b><\/p>\n

(Inches)<\/b><\/p>\n<\/td>\n

\n

Weight<\/b><\/p>\n

Each (Lbs.)<\/b><\/p>\n<\/td>\n

\n

Working Load<\/b><\/p>\n

Limit (Lbs\/kg)<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

Screw Pin<\/b><\/p>\n<\/td>\n

\n

Safety Pin<\/b><\/p>\n<\/td>\n

\n

Length<\/b><\/p>\n<\/td>\n

\n

Width<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

1\/4<\/p>\n<\/td>\n

\n

SPAS140<\/p>\n<\/td>\n

\n

SPNAS140<\/p>\n<\/td>\n

\n

1\/16<\/p>\n<\/td>\n

\n

1\/16<\/p>\n<\/td>\n

\n

.10<\/p>\n<\/td>\n

\n

450\/204<\/p>\n<\/td>\n<\/tr>\n

\n

5\/16<\/p>\n<\/td>\n

\n

SPAS516<\/p>\n<\/td>\n

\n

SPNAS516<\/p>\n<\/td>\n

\n

1\/16<\/p>\n<\/td>\n

\n

1\/16<\/p>\n<\/td>\n

\n

.16<\/p>\n<\/td>\n

\n

650\/295<\/p>\n<\/td>\n<\/tr>\n

\n

3\/8<\/p>\n<\/td>\n

\n

SPAS380<\/p>\n<\/td>\n

\n

SPNAS380<\/p>\n<\/td>\n

\n

1\/8<\/p>\n<\/td>\n

\n

1\/16<\/p>\n<\/td>\n

\n

.20<\/p>\n<\/td>\n

\n

1000\/454<\/p>\n<\/td>\n<\/tr>\n

\n

7\/16<\/p>\n<\/td>\n

\n

SPAS716<\/p>\n<\/td>\n

\n

SPNAS716<\/p>\n<\/td>\n

\n

1\/8<\/p>\n<\/td>\n

\n

1\/16<\/p>\n<\/td>\n

\n

.50<\/p>\n<\/td>\n

\n

1375\/624<\/p>\n<\/td>\n<\/tr>\n

\n

1\/2<\/p>\n<\/td>\n

\n

SPAS120<\/p>\n<\/td>\n

\n

SPNAS120<\/p>\n<\/td>\n

\n

1\/8<\/p>\n<\/td>\n

\n

1\/16<\/p>\n<\/td>\n

\n

.72<\/p>\n<\/td>\n

\n

1990\/903<\/p>\n<\/td>\n<\/tr>\n

\n

5\/8<\/p>\n<\/td>\n

\n

SPAS580<\/p>\n<\/td>\n

\n

SPNAS580<\/p>\n<\/td>\n

\n

1\/8<\/p>\n<\/td>\n

\n

1\/16<\/p>\n<\/td>\n

\n

1.38<\/p>\n<\/td>\n

\n

3000\/1383<\/p>\n<\/td>\n<\/tr>\n

\n

3\/4<\/p>\n<\/td>\n

\n

SPAS340<\/p>\n<\/td>\n

\n

SPNAS340<\/p>\n<\/td>\n

\n

1\/4<\/p>\n<\/td>\n

\n

1\/16<\/p>\n<\/td>\n

\n

2.22<\/p>\n<\/td>\n

\n

4475\/2030<\/p>\n<\/td>\n<\/tr>\n

\n

7\/8<\/p>\n<\/td>\n

\n

SPAS780<\/p>\n<\/td>\n

\n

SPNAS780<\/p>\n<\/td>\n

\n

1\/4<\/p>\n<\/td>\n

\n

1\/16<\/p>\n<\/td>\n

\n

3.28<\/p>\n<\/td>\n

\n

6000\/2722<\/p>\n<\/td>\n<\/tr>\n

\n

1<\/p>\n<\/td>\n

\n

SPAS100<\/p>\n<\/td>\n

\n

SPNAS100<\/p>\n<\/td>\n

\n

1\/4<\/p>\n<\/td>\n

\n

1\/16<\/p>\n<\/td>\n

\n

5.31<\/p>\n<\/td>\n

\n

7950\/3606<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Guy Hook<\/strong><\/h2>\n

Material Specifications: Stainless Steel Type 316<\/p>\n

\"06-Poleline-Hardware-image-18\"<\/p>\n\n\n\n\n\n\n
\n

Catalog Number<\/b><\/p>\n<\/td>\n

\n

Maximum Wire<\/b><\/p>\n<\/td>\n

\n

Mounting<\/b><\/p>\n

Bolts<\/b><\/p>\n<\/td>\n

\n

Dimensions (Inches)<\/b><\/p>\n<\/td>\n

\n

Minimum Ultimate (Lbs.)<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

\u201cA\u201d<\/p>\n<\/td>\n

\n

\u201cB\u201d<\/p>\n<\/td>\n

\n

\u201cC\u201d<\/p>\n<\/td>\n

\n

\u201cR\u201d<\/p>\n<\/td>\n<\/tr>\n

\n

GH1-316SS<\/p>\n<\/td>\n

\n

9\/16<\/p>\n<\/td>\n

\n

5\/8 \u2013 3\/4<\/p>\n<\/td>\n

\n

3<\/p>\n<\/td>\n

\n

5\/16<\/p>\n<\/td>\n

\n

2 7\/8<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

20,000<\/p>\n<\/td>\n<\/tr>\n

\n

GH2-316SS<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

Top 1 \u2013 7\/8<\/p>\n

Bottom 3\/4 \u2013 5\/8<\/p>\n

And\/or 1\/2 LS<\/p>\n<\/td>\n

\n

4<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

3 7\/16<\/p>\n<\/td>\n

\n

7\/8<\/p>\n<\/td>\n

\n

25,000<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

*Two spurs to resist pole splitting
\n*More surface in contact with pole than other comparable guy attachments – greater protection to wood fibers
\n*For round or flat surfaces
\n*Will intercept wire at any angle<\/p>\n

 <\/p>\n

Support Clamp, Messenger<\/strong><\/h2>\n

Material: Galvanized Steel
\nCatalog Number: MSC1-GA, MSC2-SS-Stainless Steel
\nEquivalent To: Joslyn PA178
\nMounting Bolt: 5\/8″
\nMessenger Range: 0.35 – 0.75 Diameter
\nPole to Messenger: 1 1\/2″<\/p>\n

\"06-Poleline-Hardware-image-19\"<\/p>\n

*Hanger exceeds medium duty requirements EE1-NEMA standards for aerial cable hangers.
\n*Has a hook to support cable during stringing operation.
\n*independent clamping ensures that the messenger remains secured if pole shrinkage occurs.
\n*Curved grooved saddle for additional cable support.
\n*The bottom lip groove move to an upward position to support cable during installation.<\/p>\n

 <\/p>\n

Suspension Clamps, Messenger<\/strong><\/h2>\n

Material: AISI Type 316 Stainless Steel
\nSpecification sheets on following pages.<\/p>\n

\"06-Poleline-Hardware-image-20\"<\/p>\n

Note: All hardware for above items are included:<\/p>\n\n\n\n\n\n\n\n\n\n\n
\n

Catalog Number<\/b><\/p>\n<\/td>\n

\n

Description<\/b><\/p>\n<\/td>\n

\n

Dimension (Inches)<\/b><\/p>\n<\/td>\n

\n

Approx. Weight<\/b><\/p>\n

(Lbs.)\/100 Pieces<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

Strand Size<\/b><\/p>\n<\/td>\n

\n

Length<\/b><\/p>\n<\/td>\n

\n

Mtg. Hole<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

SBSC1-316SS<\/p>\n<\/td>\n

\n

1-Bolt Straight<\/p>\n<\/td>\n

\n

1\/4 \u2013 7\/16<\/p>\n<\/td>\n

\n

2 3\/8<\/p>\n<\/td>\n

\n

11\/16<\/p>\n<\/td>\n

\n

76<\/p>\n<\/td>\n<\/tr>\n

\n

TBC1-316SS<\/p>\n<\/td>\n

\n

3-Bolt Straight<\/p>\n<\/td>\n

\n

1\/4 \u2013 7\/16<\/p>\n<\/td>\n

\n

5 3\/4<\/p>\n<\/td>\n

\n

11\/16<\/p>\n<\/td>\n

\n

224<\/p>\n<\/td>\n<\/tr>\n

\n

TBC1.5-316SS<\/p>\n<\/td>\n

\n

3-Bolt Straight<\/p>\n<\/td>\n

\n

1\/4 \u2013 7\/16<\/p>\n<\/td>\n

\n

5 3\/4<\/p>\n<\/td>\n

\n

13\/16<\/p>\n<\/td>\n

\n

224<\/p>\n<\/td>\n<\/tr>\n

\n

TBC2-316SS<\/p>\n<\/td>\n

\n

3-Bolt Straight<\/p>\n<\/td>\n

\n

3\/8 \u2013 3\/4<\/p>\n<\/td>\n

\n

5 3\/4<\/p>\n<\/td>\n

\n

13\/16<\/p>\n<\/td>\n

\n

224<\/p>\n<\/td>\n<\/tr>\n

\n

TBCC1-316SS<\/p>\n<\/td>\n

\n

3-Bolt Curved<\/p>\n<\/td>\n

\n

1\/4 \u2013 7\/16<\/p>\n<\/td>\n

\n

7 1\/4<\/p>\n<\/td>\n

\n

11\/16<\/p>\n<\/td>\n

\n

290<\/p>\n<\/td>\n<\/tr>\n

\n

TBCC1.5-316SS<\/p>\n<\/td>\n

\n

3-Bolt Curved<\/p>\n<\/td>\n

\n

1\/4 \u2013 7\/16<\/p>\n<\/td>\n

\n

7 1\/4<\/p>\n<\/td>\n

\n

13\/16<\/p>\n<\/td>\n

\n

375<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

*Heavy Duty<\/p>\n

 <\/p>\n

Messenger Clamp, Serpentine<\/strong><\/h2>\n

\"06-Poleline-Hardware-image-21\"<\/p>\n

Serpentine clamp for jacketed strand
\nFigure 8 messenger<\/p>\n

The illustration above details the use of a cable clamp. The clamp has serpentine grooves to prevent slippage of jacket strand through the clamp. This clamp may be used on all straight line poles and at the corner with angles up to 30 degrees. The clamp is installed without slitting the web.<\/p>\n

\"06-Poleline-Hardware-image-22\"<\/p>\n

Standard Pole Attachment Detail<\/p>\n\n\n\n\n\n\n\n\n\n\n
\n

Catalog Number<\/b><\/p>\n<\/td>\n

\n

Description<\/b><\/p>\n<\/td>\n

\n

Dimension (Inches)<\/b><\/p>\n<\/td>\n

\n

Approx. Weight<\/b><\/p>\n

(Lbs.)\/100 Pieces<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

Strand Size<\/b><\/p>\n<\/td>\n

\n

Length<\/b><\/p>\n<\/td>\n

\n

Mtg. Hole<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

SBSC1-316SS<\/p>\n<\/td>\n

\n

1-Bolt Straight<\/p>\n<\/td>\n

\n

1\/4 \u2013 7\/16<\/p>\n<\/td>\n

\n

2 3\/8<\/p>\n<\/td>\n

\n

11\/16<\/p>\n<\/td>\n

\n

76<\/p>\n<\/td>\n<\/tr>\n

\n

TBC1-316SS<\/p>\n<\/td>\n

\n

3-Bolt Straight<\/p>\n<\/td>\n

\n

1\/4 \u2013 7\/16<\/p>\n<\/td>\n

\n

5 3\/4<\/p>\n<\/td>\n

\n

11\/16<\/p>\n<\/td>\n

\n

224<\/p>\n<\/td>\n<\/tr>\n

\n

TBC1.5-316SS<\/p>\n<\/td>\n

\n

3-Bolt Straight<\/p>\n<\/td>\n

\n

1\/4 \u2013 7\/16<\/p>\n<\/td>\n

\n

5 3\/4<\/p>\n<\/td>\n

\n

13\/16<\/p>\n<\/td>\n

\n

224<\/p>\n<\/td>\n<\/tr>\n

\n

TBC2-316SS<\/p>\n<\/td>\n

\n

3-Bolt Straight<\/p>\n<\/td>\n

\n

3\/8 \u2013 3\/4<\/p>\n<\/td>\n

\n

5 3\/4<\/p>\n<\/td>\n

\n

13\/16<\/p>\n<\/td>\n

\n

224<\/p>\n<\/td>\n<\/tr>\n

\n

TBCC1-316SS<\/p>\n<\/td>\n

\n

3-Bolt Curved<\/p>\n<\/td>\n

\n

1\/4 \u2013 7\/16<\/p>\n<\/td>\n

\n

7 1\/4<\/p>\n<\/td>\n

\n

11\/16<\/p>\n<\/td>\n

\n

290<\/p>\n<\/td>\n<\/tr>\n

\n

TBCC1.5-316SS<\/p>\n<\/td>\n

\n

3-Bolt Curved<\/p>\n<\/td>\n

\n

1\/4 \u2013 7\/16<\/p>\n<\/td>\n

\n

7 1\/4<\/p>\n<\/td>\n

\n

13\/16<\/p>\n<\/td>\n

\n

375<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Lashing Wire Clamp<\/strong><\/h2>\n

Material: Stainless Steel Type 304<\/strong>
\nCatalog Number: LWC-304SS<\/p>\n

Material: CDA-655 Silicon Bronze<\/strong>
\nCatalog Number: LWC-655SB<\/p>\n

\"06-Poleline-Hardware-image-23\"<\/p>\n

Not: Studs are staked to prevent nuts from coming off during packing or shipment.<\/p>\n

Stainless Steel & Silicon Bronze Lashing Wire Clamp Specifications<\/strong><\/p>\n

1. Scope:
\nThis item standard is intended for use in conjunction with CSA standard CAN\/CSA-C83. This item is normally mounted on messenger strand and is used to terminate cable lashing wire.<\/p>\n

2. Assembly:
\nThe lashing wire clamp is comprised of two clamp sections, two flat washers, and two hex nut assemblies on a shouldered stud. The stud should key into one clamp section at assembly to prevent stud rotation as the nuts are tightened. This keying feature is constructed to allow proper closing of the jaws. Both ends of the stud should be suitably modified after assembly to prevent loss of the nuts.<\/p>\n

3. Accommodation:
\nThe clamp will accommodate a range of messenger strand from 3\/16″ to 9’16” diameter designated strand size.<\/p>\n

4. Stud Strength:
\nThe stud will withstand without fracture a torque of 10 N*m and 15 N*m for minimum reusable and ultimate torque strength.<\/p>\n

5. Slip Strength Test:
\nThe clamp shall be assembled to a suitably anchored length of strand of designated strand size No. 5, CSA Standard CAN3-G12, and the clamp nut is tightened to 10 N*m torque. A force of 1 kn, applied to the clamp, parallel to the strand, will cause less than 4mm movement between the clamp and strand.<\/p>\n

 <\/p>\n

Wire Rope Clips<\/strong><\/h2>\n

Stainless Steel Type 316 (Drop Forged)<\/p>\n

\"06-Poleline-Hardware-image-24\"<\/p>\n\n\n\n\n\n\n\n\n\n
\n

Catalog Number<\/b><\/p>\n<\/td>\n

\n

Size<\/b><\/p>\n<\/td>\n

\n

Minimum Number of Clips Required<\/b><\/p>\n<\/td>\n

\n

Torque in Lbs. Ft.<\/b><\/p>\n<\/td>\n

\n

Approx. Wgt. Each (Lbs.)<\/b><\/p>\n<\/td>\n

\n

Amount of rope to turn back<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

WRC-180<\/p>\n<\/td>\n

\n

1\/8<\/p>\n<\/td>\n

\n

2<\/p>\n<\/td>\n

\n

4.5<\/p>\n<\/td>\n

\n

.05<\/p>\n<\/td>\n

\n

3 1\/4<\/p>\n<\/td>\n<\/tr>\n

\n

WRC-316<\/p>\n<\/td>\n

\n

3\/16<\/p>\n<\/td>\n

\n

2<\/p>\n<\/td>\n

\n

7.5<\/p>\n<\/td>\n

\n

.106<\/p>\n<\/td>\n

\n

3 3\/4<\/p>\n<\/td>\n<\/tr>\n

\n

WRC-140<\/p>\n<\/td>\n

\n

1\/4<\/p>\n<\/td>\n

\n

2<\/p>\n<\/td>\n

\n

15<\/p>\n<\/td>\n

\n

.19<\/p>\n<\/td>\n

\n

4 3\/4<\/p>\n<\/td>\n<\/tr>\n

\n

WRC-380<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n

\n

2<\/p>\n<\/td>\n

\n

45<\/p>\n<\/td>\n

\n

.46<\/p>\n<\/td>\n

\n

6 1\/2<\/p>\n<\/td>\n<\/tr>\n

\n

WRC-120<\/p>\n<\/td>\n

\n

1\/2<\/p>\n<\/td>\n

\n

3<\/p>\n<\/td>\n

\n

65<\/p>\n<\/td>\n

\n

.68<\/p>\n<\/td>\n

\n

11 1\/2<\/p>\n<\/td>\n<\/tr>\n

\n

WRC-580<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

3<\/p>\n<\/td>\n

\n

95<\/p>\n<\/td>\n

\n

1.0<\/p>\n<\/td>\n

\n

12<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

*Based on clean, unlubricated threads.
\nMinimum torque required to reach max. holding power.<\/p>\n

\"06-Poleline-Hardware-image-25\"<\/p>\n

Below is the recommended method of applying U-bolt clips to get maximum holding power of the clip and is based on the use of proper size U-bolts on new rope.<\/p>\n

1. Refer to above table in following these instructions. Turn back specified amount of rope from thimble or loop. Apply first clip, one base width from dead end of rope. Apply U-bolt over dead end of wire rope with live end resting in saddle. Tighten nuts evenly, alternating from one nut to the other until reaching the recommended torque.<\/p>\n

2. When two clips are required apply the second clip as near the loop or thimble as possible. Tighten nuts evenly, alternating until reaching the recommended torque. When more than two clips are required, apply the second clip as near the loop or thimble as possible, turn nuts on second clip firmly, but do not tighten. Proceed to step 3.<\/p>\n

3. When three or more clips are required, space additional clips evenly between first two, take up rope, slack-tighten nuts on each U-bolt evenly, alternating from one nut to the other until reaching recommended torque.<\/p>\n

4. Apply first load to test the assembly. This load should be of equal or greater weight than loads expected in use. Next, check and re-tighten nuts to recommended torque.<\/p>\n

(Reprinted from the Wire Rope Users Manual and the Wire Rope Technical Board)<\/p>\n

 <\/p>\n

Wire Rope Thimbles<\/strong><\/h2>\n

Standard Wire Rope Thimbles
\nMaterial: Stainless Steel Type 302<\/p>\n

\"06-Poleline-Hardware-image-26\"<\/p>\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n\n

Dimensions (Inches)<\/b><\/p>\n<\/td>\n

<\/td>\n<\/tr>\n
\n

Catalog Number<\/b><\/p>\n<\/td>\n

\n

Rope Diameter<\/b><\/p>\n<\/td>\n

\n

Overall Thickness<\/b><\/p>\n<\/td>\n

\n

Overall Length<\/b><\/p>\n<\/td>\n

\n

Inside Width<\/b><\/p>\n<\/td>\n

\n

Weight Per 100 Lbs.<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

SWRT180<\/p>\n<\/td>\n

\n

1\/8<\/p>\n<\/td>\n

\n

9\/32<\/p>\n<\/td>\n

\n

1 3\/4<\/p>\n<\/td>\n

\n

23\/32<\/p>\n<\/td>\n

\n

3<\/p>\n<\/td>\n<\/tr>\n

\n

SWRT316<\/p>\n<\/td>\n

\n

3\/16<\/p>\n<\/td>\n

\n

11\/32<\/p>\n<\/td>\n

\n

1 3\/4<\/p>\n<\/td>\n

\n

23\/32<\/p>\n<\/td>\n

\n

3<\/p>\n<\/td>\n<\/tr>\n

\n

SWRT140<\/p>\n<\/td>\n

\n

1\/4<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n

\n

1 7\/8<\/p>\n<\/td>\n

\n

23\/32<\/p>\n<\/td>\n

\n

5<\/p>\n<\/td>\n<\/tr>\n

\n

SWRT516<\/p>\n<\/td>\n

\n

5\/16<\/p>\n<\/td>\n

\n

7\/16<\/p>\n<\/td>\n

\n

2 3\/32<\/p>\n<\/td>\n

\n

27\/32<\/p>\n<\/td>\n

\n

5<\/p>\n<\/td>\n<\/tr>\n

\n

SWRT380<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n

\n

9\/16<\/p>\n<\/td>\n

\n

2 1\/4<\/p>\n<\/td>\n

\n

31\/32<\/p>\n<\/td>\n

\n

8<\/p>\n<\/td>\n<\/tr>\n

\n

SWRT120<\/p>\n<\/td>\n

\n

1\/2<\/p>\n<\/td>\n

\n

21\/32<\/p>\n<\/td>\n

\n

2 1\/2<\/p>\n<\/td>\n

\n

1 5\/32<\/p>\n<\/td>\n

\n

14<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Note: Thimbles are not designed for load carrying purposes, therefore working load limits have not been established.<\/p>\n

Heavy Wire Rope Thimbles<\/strong><\/h2>\n

Material: Stainless Steel Type 316<\/p>\n

\"06-Poleline-Hardware-image-27\"<\/p>\n\n\n\n\n\n\n\n\n\n\n
<\/td>\n<\/td>\n\n

Dimensions (Inches)<\/b><\/p>\n<\/td>\n

<\/td>\n<\/tr>\n
\n

Catalog Number<\/b><\/p>\n<\/td>\n

\n

Rope Diameter<\/b><\/p>\n<\/td>\n

\n

Overall Thickness<\/b><\/p>\n<\/td>\n

\n

Overall Length<\/b><\/p>\n<\/td>\n

\n

Inside Width<\/b><\/p>\n<\/td>\n

\n

Weight Per 100 Lbs.<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

HWRT140<\/p>\n<\/td>\n

\n

1\/4<\/p>\n<\/td>\n

\n

3\/32<\/p>\n<\/td>\n

\n

2 316<\/p>\n<\/td>\n

\n

7\/8<\/p>\n<\/td>\n

\n

7.5<\/p>\n<\/td>\n<\/tr>\n

\n

HWRT516<\/p>\n<\/td>\n

\n

5\/16<\/p>\n<\/td>\n

\n

1\/2<\/p>\n<\/td>\n

\n

2 1\/2<\/p>\n<\/td>\n

\n

1 1\/16<\/p>\n<\/td>\n

\n

14<\/p>\n<\/td>\n<\/tr>\n

\n

HWRT380<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n

\n

21\/32<\/p>\n<\/td>\n

\n

2 7\/8<\/p>\n<\/td>\n

\n

1 1\/8<\/p>\n<\/td>\n

\n

25<\/p>\n<\/td>\n<\/tr>\n

\n

HWRT120<\/p>\n<\/td>\n

\n

1\/2<\/p>\n<\/td>\n

\n

27\/32<\/p>\n<\/td>\n

\n

3 5\/8<\/p>\n<\/td>\n

\n

1 1\/2<\/p>\n<\/td>\n

\n

51<\/p>\n<\/td>\n<\/tr>\n

\n

HWRT580<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

4 1\/4<\/p>\n<\/td>\n

\n

1 3\/4<\/p>\n<\/td>\n

\n

75<\/p>\n<\/td>\n<\/tr>\n

\n

HWRT340<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

1 1\/4<\/p>\n<\/td>\n

\n

5<\/p>\n<\/td>\n

\n

2<\/p>\n<\/td>\n

\n

147<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Thimble Eye Nut<\/strong><\/h2>\n

Material: Stainless Steel Type 316 & Bronze<\/p>\n

\"06-Poleline-Hardware-image-28\"<\/p>\n\n\n\n\n\n\n\n\n
\n

Catalog Number<\/b><\/p>\n<\/td>\n

\n

Bolt Diameter<\/b><\/p>\n<\/td>\n

\n

Dimensions (Inches)<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

\u201cA\u201d<\/b><\/p>\n<\/td>\n

\n

\u201cB\u201d<\/b><\/p>\n<\/td>\n

\n

\u201cC\u201d<\/b><\/p>\n<\/td>\n

\n

\u201cD\u201d<\/b><\/p>\n<\/td>\n

\n

`\u201dE\u201d<\/b><\/p>\n<\/td>\n

\n

\u201cF\u201d<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

TEN58SS<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

1 1\/2<\/p>\n<\/td>\n

\n

1 1\/2<\/p>\n<\/td>\n

\n

7\/8<\/p>\n<\/td>\n

\n

1 3\/8<\/p>\n<\/td>\n

\n

1 7\/8<\/p>\n<\/td>\n

\n

3<\/p>\n<\/td>\n<\/tr>\n

\n

TEN34SS<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

1 1\/2<\/p>\n<\/td>\n

\n

1 1\/2<\/p>\n<\/td>\n

\n

7\/8<\/p>\n<\/td>\n

\n

1 3\/8<\/p>\n<\/td>\n

\n

1 7\/8<\/p>\n<\/td>\n

\n

3<\/p>\n<\/td>\n<\/tr>\n

\n

TEN58SB<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

1 1\/2<\/p>\n<\/td>\n

\n

1 1\/2<\/p>\n<\/td>\n

\n

7\/8<\/p>\n<\/td>\n

\n

1 3\/8<\/p>\n<\/td>\n

\n

1 7\/8<\/p>\n<\/td>\n

\n

3<\/p>\n<\/td>\n<\/tr>\n

\n

TEN34SB<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

1 1\/2<\/p>\n<\/td>\n

\n

1 1\/2<\/p>\n<\/td>\n

\n

7\/8<\/p>\n<\/td>\n

\n

1 3\/8<\/p>\n<\/td>\n

\n

1 7\/8<\/p>\n<\/td>\n

\n

3<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Crossover Clamps<\/strong><\/h2>\n

Stainless Steel Type 316
\nCrossover Clamps for CATV or Telephone Cables<\/p>\n

\"06-Poleline-Hardware-image-29\"<\/p>\n

Crossover clamps are used to clamp two messengers where they cross at right angles. The drop forged clamp sections are 1-1\/2″ wide and 3-1\/4″ long. Two 1\/2″ diameter bolts have oval shoulders to prevent turning when tightening. Unique cable grooves with a center “dimple” provide superior clamping action.<\/p>\n\n\n\n\n
\n

Part Number<\/b><\/p>\n<\/td>\n

\n

For Strand Diameter (Inches)<\/b><\/p>\n<\/td>\n

\n

Approximate Shipping Weight (Lbs. per 100 Pcs.)<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

COCI-316SS<\/p>\n<\/td>\n

\n

5\/16 to 3\/8<\/p>\n<\/td>\n

\n

154<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Span Clamp<\/strong><\/h2>\n

Material: Stainless Steel Type 316
\nCatalog Number: SPC1-316SS<\/p>\n

\"06-Poleline-Hardware-image-30\"<\/p>\n

 <\/p>\n

Copper Ground Wire Clips<\/strong><\/h2>\n

\"06-Poleline-Hardware-image-31\"<\/p>\n\n\n\n\n
\n

Part<\/b><\/p>\n

Number<\/b><\/p>\n<\/td>\n

\n

\u201cA\u201d<\/b><\/p>\n

(Inches)<\/b><\/p>\n<\/td>\n

\n

\u201cB\u201d<\/b><\/p>\n

(Inches)<\/b><\/p>\n<\/td>\n

\n

\u201cC\u201d<\/b><\/p>\n

(Inches)<\/b><\/p>\n<\/td>\n

\n

\u201cD\u201d<\/b><\/p>\n

(Inches)<\/b><\/p>\n<\/td>\n

\n

\u201cR\u201d<\/b><\/p>\n

(Inches)<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

CGWC-1<\/p>\n<\/td>\n

\n

1 1\/2<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

1\/8<\/p>\n<\/td>\n

\n

9\/32<\/p>\n<\/td>\n

\n

3\/16<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

*Made from Hard Copper Flat bar.
\n*Used for clamping stranded wire.
\n*Made to Hydro Spec.<\/p>\n

 <\/p>\n

Ground Wire Clips<\/strong><\/h2>\n

\"06-Poleline-Hardware-image-32\"<\/p>\n

*Made from 1\/8″ x 3\/4″ Stainless Steel Type 316
\n*Used to fasten ground wires on steel structures.
\n*Accommodates conductor range of 1\/0 to 2000 MCM AWG Stranded Copper<\/p>\n

 <\/p>\n

Angle Thimble Eyelet<\/strong><\/h2>\n

\"06-Poleline-Hardware-image-33\"<\/p>\n\n\n\n\n\n
\n

Part Number<\/b><\/p>\n<\/td>\n

\n

Bolt Dia. (Inches)<\/b><\/p>\n<\/td>\n

\n

Strand Diameter<\/b><\/p>\n<\/td>\n

\n

Strength (Lbs.)<\/b><\/p>\n<\/td>\n

\n

Wt. Lbs. Per 100 Pcs.<\/b><\/p>\n<\/td>\n

\n

Std. Pack<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

ATE1-316SS<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

3\/16 to 1\/2<\/p>\n<\/td>\n

\n

12,400<\/p>\n<\/td>\n

\n

138<\/p>\n<\/td>\n

\n

50<\/p>\n<\/td>\n<\/tr>\n

\n

AET2-316SS<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

3\/16 to 1\/2<\/p>\n<\/td>\n

\n

18,300<\/p>\n<\/td>\n

\n

128<\/p>\n<\/td>\n

\n

50<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

*Drop Forged Stainless Steel Type 316.
\n*At 45 degree angle.<\/p>\n

 <\/p>\n

Bolt Eyes<\/strong><\/h2>\n

\"06-Poleline-Hardware-image-34\"<\/p>\n\n\n\n\n\n
\n

Part Number<\/b><\/p>\n<\/td>\n

\n

Bolt Dia. (Inches)<\/b><\/p>\n<\/td>\n

\n

Bolt Hole (Inches)<\/b><\/p>\n<\/td>\n

\n

Inside Eye (Inches)<\/b><\/p>\n<\/td>\n

\n

Wt. Lbs. Per 100 Pcs.<\/b><\/p>\n<\/td>\n

\n

Std. Pack<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

BE1-316SS<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

13\/16 x 1<\/p>\n<\/td>\n

\n

1 1\/4 x 3<\/p>\n<\/td>\n

\n

125<\/p>\n<\/td>\n

\n

50<\/p>\n<\/td>\n<\/tr>\n

\n

BE2-316SS<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

11\/16 to 1<\/p>\n<\/td>\n

\n

1 1\/4 x 3<\/p>\n<\/td>\n

\n

125<\/p>\n<\/td>\n

\n

50<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

*Drop Forged Stainless Steel Type 316.
\n*Bolt can be inserted at any angle because hole is elongated.
\n*Used for Dead-Ending on cross arms.<\/p>\n

 <\/p>\n

Thimble Eye Bolts, Straight<\/strong><\/h2>\n

\"06-Poleline-Hardware-image-35\"<\/p>\n

5\/8″ Diameter
\nMinimum Strength 12,400 Lbs<\/p>\n\n\n\n\n\n\n\n\n\n\n
\n

Part Number<\/b><\/p>\n<\/td>\n

\n

Length (Inches)<\/b><\/p>\n<\/td>\n

\n

Approx. Wgt.<\/b><\/p>\n

(Lbs. per 100 Pcs.)<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

STEB5808<\/p>\n<\/td>\n

\n

8<\/p>\n<\/td>\n

\n

125<\/p>\n<\/td>\n<\/tr>\n

\n

STEB5810<\/p>\n<\/td>\n

\n

10<\/p>\n<\/td>\n

\n

144<\/p>\n<\/td>\n<\/tr>\n

\n

STEB5812<\/p>\n<\/td>\n

\n

12<\/p>\n<\/td>\n

\n

162<\/p>\n<\/td>\n<\/tr>\n

\n

STEB5814<\/p>\n<\/td>\n

\n

14<\/p>\n<\/td>\n

\n

180<\/p>\n<\/td>\n<\/tr>\n

\n

STEB5816<\/p>\n<\/td>\n

\n

16<\/p>\n<\/td>\n

\n

195<\/p>\n<\/td>\n<\/tr>\n

\n

STEB5818<\/p>\n<\/td>\n

\n

18<\/p>\n<\/td>\n

\n

216<\/p>\n<\/td>\n<\/tr>\n

\n

STEB5820<\/p>\n<\/td>\n

\n

20<\/p>\n<\/td>\n

\n

236<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

3\/4″ Diameter
\nMinimum Strength 18,300 Lbs<\/p>\n\n\n\n\n\n\n\n\n\n
\n

Part Number<\/b><\/p>\n<\/td>\n

\n

Length (Inches)<\/b><\/p>\n<\/td>\n

\n

Approx. Wgt.<\/b><\/p>\n

(Lbs. per 100 Pcs.)<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

STEB3410<\/p>\n<\/td>\n

\n

10<\/p>\n<\/td>\n

\n

210<\/p>\n<\/td>\n<\/tr>\n

\n

STEB3412<\/p>\n<\/td>\n

\n

12<\/p>\n<\/td>\n

\n

235<\/p>\n<\/td>\n<\/tr>\n

\n

STEB3414<\/p>\n<\/td>\n

\n

14<\/p>\n<\/td>\n

\n

260<\/p>\n<\/td>\n<\/tr>\n

\n

STEB3416<\/p>\n<\/td>\n

\n

16<\/p>\n<\/td>\n

\n

285<\/p>\n<\/td>\n<\/tr>\n

\n

STEB3418<\/p>\n<\/td>\n

\n

18<\/p>\n<\/td>\n

\n

310<\/p>\n<\/td>\n<\/tr>\n

\n

STEB3420<\/p>\n<\/td>\n

\n

20<\/p>\n<\/td>\n

\n

330<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

*Drop Forged Stainless Steel Type 316
\n*Threads are 6″ long.
\n*Each bolt supplied with one square nut.<\/p>\n

 <\/p>\n

Thimble Eye Bolts, Angle<\/strong><\/h2>\n

\"06-Poleline-Hardware-image-36\"<\/p>\n

5\/8″ Diameter<\/strong>
\nMinimum Strength 12,400 Lbs.<\/p>\n\n\n\n\n\n\n\n\n\n\n
\n

Part Number<\/b><\/p>\n<\/td>\n

\n

Length (Inches)<\/b><\/p>\n<\/td>\n

\n

Approx. Wgt.<\/b><\/p>\n

(Lbs. per 100 Pcs.)<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

ATEB5808<\/p>\n<\/td>\n

\n

8<\/p>\n<\/td>\n

\n

130<\/p>\n<\/td>\n<\/tr>\n

\n

ATEB5810<\/p>\n<\/td>\n

\n

10<\/p>\n<\/td>\n

\n

148<\/p>\n<\/td>\n<\/tr>\n

\n

ATEB3414<\/p>\n<\/td>\n

\n

12<\/p>\n<\/td>\n

\n

166<\/p>\n<\/td>\n<\/tr>\n

\n

ATEB3416<\/p>\n<\/td>\n

\n

14<\/p>\n<\/td>\n

\n

184<\/p>\n<\/td>\n<\/tr>\n

\n

ATEB3418<\/p>\n<\/td>\n

\n

16<\/p>\n<\/td>\n

\n

202<\/p>\n<\/td>\n<\/tr>\n

\n

ATEB3420<\/p>\n<\/td>\n

\n

18<\/p>\n<\/td>\n

\n

220<\/p>\n<\/td>\n<\/tr>\n

\n

ATEB5820<\/p>\n<\/td>\n

\n

20<\/p>\n<\/td>\n

\n

238<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

3\/4″ Diameter<\/strong>
\nMinimum Strength 18,300 Lbs.<\/p>\n\n\n\n\n\n\n\n\n\n
\n

Part Number<\/b><\/p>\n<\/td>\n

\n

Length (Inches)<\/b><\/p>\n<\/td>\n

\n

Approx. Wgt.<\/b><\/p>\n

(Lbs. per 100 Pcs.)<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

ATEB3410<\/p>\n<\/td>\n

\n

10<\/p>\n<\/td>\n

\n

200<\/p>\n<\/td>\n<\/tr>\n

\n

ATEB3412<\/p>\n<\/td>\n

\n

12<\/p>\n<\/td>\n

\n

225<\/p>\n<\/td>\n<\/tr>\n

\n

ATEB3414<\/p>\n<\/td>\n

\n

14<\/p>\n<\/td>\n

\n

250<\/p>\n<\/td>\n<\/tr>\n

\n

ATEB3416<\/p>\n<\/td>\n

\n

16<\/p>\n<\/td>\n

\n

275<\/p>\n<\/td>\n<\/tr>\n

\n

ATEB3418<\/p>\n<\/td>\n

\n

18<\/p>\n<\/td>\n

\n

300<\/p>\n<\/td>\n<\/tr>\n

\n

ATEB3420<\/p>\n<\/td>\n

\n

20<\/p>\n<\/td>\n

\n

310<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

*Drop Forged Stainless Steel Type 316
\n*Minimal length of threads is 6″.
\n*Each bolt supplied with one square nut.
\n*Bent at an angle of 45 degrees.<\/p>\n

 <\/p>\n

Guy Clamp<\/strong><\/h2>\n

*Parallel grooves trap strand tightly without marring.
\n*Plate halves align evenly for easy application. Each bolt has a shoulder to prevent turning while tightening.
\n*Material: Stainless Steel Type 316<\/p>\n

\"06-Poleline-Hardware-image-37\"<\/p>\n

5\/8″ Clamp Bolts<\/p>\n\n\n\n\n
\n

Part Number<\/b><\/p>\n<\/td>\n

\n

Number of Bolts<\/b><\/p>\n<\/td>\n

\n

Length (Inches)<\/b><\/p>\n<\/td>\n

\n

Width (Inches)<\/b><\/p>\n<\/td>\n

\n

Accepts Strand Size<\/b><\/p>\n<\/td>\n

\n

Ship Wgt. Lbs. per 100 Pcs.<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

GC1-316SS<\/p>\n<\/td>\n

\n

3<\/p>\n<\/td>\n

\n

6<\/p>\n<\/td>\n

\n

1 21\/32<\/p>\n<\/td>\n

\n

5\/16 thru 1\/2<\/p>\n<\/td>\n

\n

252<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Hub Guards, Pole Shields<\/strong><\/h2>\n

\"06-Poleline-Hardware-image-38\"<\/p>\n\n\n\n\n\n\n
\n

Part Number<\/b><\/p>\n<\/td>\n

\n

Dimensions (Inches)<\/b><\/p>\n<\/td>\n

\n

Radius (Inches)<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

HG-PS1-316SS<\/p>\n<\/td>\n

\n

3\/16x16x18<\/p>\n<\/td>\n

\n

7 1\/2<\/p>\n<\/td>\n<\/tr>\n

\n

HG-PS2-316SS<\/p>\n<\/td>\n

\n

3\/16x16x30<\/p>\n<\/td>\n

\n

7 1\/2<\/p>\n<\/td>\n<\/tr>\n

\n

HG-PS3-316SS<\/p>\n<\/td>\n

\n

3\/16x14x30<\/p>\n<\/td>\n

\n

5 1\/2<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

*Used to protect poles from vehicle collision.
\n*Holes are 9\/16″ for 1\/2″ lag bolts.<\/p>\n

Guy Strain Plates<\/strong><\/h2>\n

\"06-Poleline-Hardware-image-39\"<\/p>\n\n\n\n\n\n
\n

Part Number<\/b><\/p>\n<\/td>\n

\n

Detail<\/b><\/p>\n<\/td>\n

\n

Size<\/b><\/p>\n<\/td>\n

\n

Wgt. Lbs. per 100 Pcs.<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

SP1-316SS<\/p>\n<\/td>\n

\n

\u201cA\u201d<\/p>\n<\/td>\n

\n

4x8x12Ga.<\/p>\n<\/td>\n

\n

110<\/p>\n<\/td>\n<\/tr>\n

\n

SP2-316SS<\/p>\n<\/td>\n

\n

\u201cB\u201d<\/p>\n<\/td>\n

\n

4x8x12Ga.<\/p>\n<\/td>\n

\n

146<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Rod Coupling, Threaded<\/strong><\/h2>\n

\"06-Poleline-Hardware-image-40\"<\/p>\n\n\n\n\n\n\n
\n

Part Number<\/b><\/p>\n<\/td>\n

\n

Rod Diameter<\/b><\/p>\n<\/td>\n

\n

Length (Inches)<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

316<\/b><\/p>\n<\/td>\n

\n

Bronze<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

RC-T58SS<\/p>\n<\/td>\n

\n

RC-T58SB<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

3<\/p>\n<\/td>\n<\/tr>\n

\n

RC-T10SS<\/p>\n<\/td>\n

\n

RC-T10SB<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

3<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Anchor Rod Extensions<\/strong><\/h2>\n

Material: Stainless Steel Type 316 and Bronze<\/p>\n

\"06-Poleline-Hardware-image-41\"<\/p>\n\n\n\n\n\n\n\n\n
\n

Part Number<\/b><\/p>\n<\/td>\n

\n

Rod Diameter<\/b><\/p>\n<\/td>\n

\n

Length (Inches)<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

316<\/b><\/p>\n<\/td>\n

\n

Bronze<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

ARE5835SS<\/p>\n<\/td>\n

\n

ARE5835SB<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

3.5<\/p>\n<\/td>\n<\/tr>\n

\n

ARE588SS<\/p>\n<\/td>\n

\n

ARE588SB<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

8<\/p>\n<\/td>\n<\/tr>\n

\n

ARE1035SS<\/p>\n<\/td>\n

\n

ARE1035SB<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

3.5<\/p>\n<\/td>\n<\/tr>\n

\n

ARE1010SS<\/p>\n<\/td>\n

\n

ARE1010SB<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

10<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Cross Plate Anchors<\/strong><\/h2>\n

Material: Stainless Steel Type 316 Plate
\n(Nut Retainer Welded to plate)<\/p>\n

\"06-Poleline-Hardware-image-42\"<\/p>\n\n\n\n\n\n
\n

Part Number<\/b><\/p>\n<\/td>\n

\n

Size (Inches)<\/b><\/p>\n<\/td>\n

\n

Rod Size<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

CPA-16<\/p>\n<\/td>\n

\n

16<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n<\/tr>\n

\n

CPA-24<\/p>\n<\/td>\n

\n

24<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Cable Messenger Hanger<\/strong><\/h2>\n

P\/N CMH-1070SS
\nMaterial: Stainless Steel Type 316<\/p>\n

P\/N CMH-1070SB
\nMaterial: CDA-655 Silicon Bronze<\/p>\n

\"06-Poleline-Hardware-image-43\"<\/p>\n

Lift and Load, Plates<\/strong><\/h2>\n

Used to protect poles on heavy down guying when thimble eye, angle thimble eye, or oval bolts are used through the pole.
\nMaterial: Stainless Steel Type 316<\/p>\n

\"06-Poleline-Hardware-image-44\"<\/p>\n\n\n\n\n\n\n\n\n
\n

Catalog Number<\/b><\/p>\n<\/td>\n

Description<\/strong><\/td>\n\n

Size of Holes (Inches)<\/b><\/p>\n<\/td>\n

\n

Plate Size (Inches)<\/b><\/b><\/p>\n<\/td>\n

\n

Approx. Ship Wgt. (Lbs. per 100 pieces)<\/b><\/b><\/p>\n<\/td>\n<\/tr>\n

\n

Top<\/b><\/p>\n<\/td>\n

\n

Bottom<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

LP2H1<\/p>\n<\/td>\n

\n

2-Hole Lift<\/p>\n<\/td>\n

\n

9\/16<\/p>\n<\/td>\n

\n

3\/4×1<\/p>\n<\/td>\n

\n

3\/16×2 1\/2×7<\/p>\n<\/td>\n

\n

98<\/p>\n<\/td>\n<\/tr>\n

\n

LP2H2<\/p>\n<\/td>\n

\n

2-Hole Lift<\/p>\n<\/td>\n

\n

9\/16<\/p>\n<\/td>\n

\n

7\/8×1<\/p>\n<\/td>\n

\n

1\/4×2 1\/2×7<\/p>\n<\/td>\n

\n

126<\/p>\n<\/td>\n<\/tr>\n

\n

LP3H1<\/p>\n<\/td>\n

\n

3-Hole Lift<\/p>\n<\/td>\n

\n

9\/16<\/p>\n<\/td>\n

\n

3\/4×1<\/p>\n<\/td>\n

\n

3\/16×2 1\/2×7<\/p>\n<\/td>\n

\n

97<\/p>\n<\/td>\n<\/tr>\n

\n

LP3H2<\/p>\n<\/td>\n

\n

3-Hole Lift<\/p>\n<\/td>\n

\n

9\/16<\/p>\n<\/td>\n

\n

7\/8×1<\/p>\n<\/td>\n

\n

1\/4×2 1\/2×7<\/p>\n<\/td>\n

\n

126<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

Turnbuckles, Open Body<\/strong><\/h2>\n

Material: Drop Forged from Type 316 Stainless Steel<\/p>\n

\"06-Poleline-Hardware-image-45\"<\/p>\n

Catalog Numbers & Working Load Limits<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Diameter (Inches)<\/b><\/p>\n<\/td>\n

\n

Take-up (Inches)<\/b><\/p>\n<\/td>\n

\n

Catalog Numbers<\/b><\/p>\n<\/td>\n

\n

Working Load Limit (Lbs.)<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

With Stubs<\/b><\/p>\n<\/td>\n

\n

Eye & Eye<\/b><\/p>\n<\/td>\n

\n

Jaw & Eye<\/b><\/p>\n<\/td>\n

\n

Jaw & Jaw<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

1\/4<\/p>\n<\/td>\n

\n

4<\/p>\n<\/td>\n

\n

T-OBSE140<\/p>\n<\/td>\n

\n

T-OBEE140<\/p>\n<\/td>\n

\n

T-OBJE140<\/p>\n<\/td>\n

\n

T-OBJJ140<\/p>\n<\/td>\n

\n

460<\/p>\n<\/td>\n<\/tr>\n

\n

5\/16<\/p>\n<\/td>\n

\n

4 1\/2<\/p>\n<\/td>\n

\n

T-OBSE516<\/p>\n<\/td>\n

\n

T-OBEE516<\/p>\n<\/td>\n

\n

T-OBJE516<\/p>\n<\/td>\n

\n

T-OBJJ516<\/p>\n<\/td>\n

\n

780<\/p>\n<\/td>\n<\/tr>\n

\n

3\/8<\/p>\n<\/td>\n

\n

6<\/p>\n<\/td>\n

\n

T-OBSE380<\/p>\n<\/td>\n

\n

T-OBEE380<\/p>\n<\/td>\n

\n

T-OBJE380<\/p>\n<\/td>\n

\n

T-OBJJ380<\/p>\n<\/td>\n

\n

1160<\/p>\n<\/td>\n<\/tr>\n

\n

1\/2<\/p>\n<\/td>\n

\n

6<\/p>\n<\/td>\n

\n

T-BOSE120<\/p>\n<\/td>\n

\n

T-OBEE120<\/p>\n<\/td>\n

\n

T-OBJE120<\/p>\n<\/td>\n

\n

T-OBJJ120<\/p>\n<\/td>\n

\n

2150<\/p>\n<\/td>\n<\/tr>\n

\n

5\/8<\/p>\n<\/td>\n

\n

6<\/p>\n<\/td>\n

\n

T-OBSE580<\/p>\n<\/td>\n

\n

T-OBEE580<\/p>\n<\/td>\n

\n

T-OBJE580<\/p>\n<\/td>\n

\n

T-OBJJ580<\/p>\n<\/td>\n

\n

3440<\/p>\n<\/td>\n<\/tr>\n

\n

3\/4<\/p>\n<\/td>\n

\n

6<\/p>\n<\/td>\n

\n

T-OBSE340<\/p>\n<\/td>\n

\n

T-OBEE340<\/p>\n<\/td>\n

\n

T-OBJE340<\/p>\n<\/td>\n

\n

T-OBJJ340<\/p>\n<\/td>\n

\n

5140<\/p>\n<\/td>\n<\/tr>\n

\n

7\/8<\/p>\n<\/td>\n

\n

6<\/p>\n<\/td>\n

\n

T-OBSE780<\/p>\n<\/td>\n

\n

T-OBEE780<\/p>\n<\/td>\n

\n

T-OBJE780<\/p>\n<\/td>\n

\n

T-OBJJ780<\/p>\n<\/td>\n

\n

7130<\/p>\n<\/td>\n<\/tr>\n

\n

1<\/p>\n<\/td>\n

\n

6<\/p>\n<\/td>\n

\n

T-OBSE100<\/p>\n<\/td>\n

\n

T-OBEE100<\/p>\n<\/td>\n

\n

T-OBJE100<\/p>\n<\/td>\n

\n

T-OBJJ100<\/p>\n<\/td>\n

\n

9370<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

\u00a0WARNING: DO NOT EXCEED WORKING LOAD LIMIT<\/strong><\/p>\n

Dimensions & Weights<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Diameter (Inches)<\/b><\/p>\n<\/td>\n

\n

Overall Length (Inches) (Bearing to Bearing Closed)<\/b><\/p>\n<\/td>\n

\n

Weight Each (Pounds)<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

Body Only<\/b><\/p>\n<\/td>\n

\n

With Stubs<\/b><\/p>\n<\/td>\n

\n

Eye & Eye<\/b><\/p>\n<\/td>\n

\n

Jaw & Eye<\/b><\/p>\n<\/td>\n

\n

Jaw & Jaw<\/b><\/p>\n<\/td>\n

\n

With Stubs<\/b><\/p>\n<\/td>\n

\n

Eye & Eye<\/b><\/p>\n<\/td>\n

\n

Jaw & Eye<\/b><\/p>\n<\/td>\n

\n

Jaw & Jaw<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

1\/4<\/p>\n<\/td>\n

\n

4 3\/4<\/p>\n<\/td>\n

\n

9<\/p>\n<\/td>\n

\n

**7<\/p>\n<\/td>\n

\n

**7 1\/4<\/p>\n<\/td>\n

\n

7 1\/2<\/p>\n<\/td>\n

\n

.25<\/p>\n<\/td>\n

\n

.25<\/p>\n<\/td>\n

\n

.30<\/p>\n<\/td>\n

\n

.34<\/p>\n<\/td>\n<\/tr>\n

\n

5\/16<\/p>\n<\/td>\n

\n

5 7\/16<\/p>\n<\/td>\n

\n

10 1\/2<\/p>\n<\/td>\n

\n

**8<\/p>\n<\/td>\n

\n

**8<\/p>\n<\/td>\n

\n

8 1\/4<\/p>\n<\/td>\n

\n

.34<\/p>\n<\/td>\n

\n

.34<\/p>\n<\/td>\n

\n

.40<\/p>\n<\/td>\n

\n

.44<\/p>\n<\/td>\n<\/tr>\n

\n

3\/8<\/p>\n<\/td>\n

\n

7 1\/8<\/p>\n<\/td>\n

\n

15<\/p>\n<\/td>\n

\n

11 1\/4<\/p>\n<\/td>\n

\n

11 1\/4<\/p>\n<\/td>\n

\n

10 7\/8<\/p>\n<\/td>\n

\n

.75<\/p>\n<\/td>\n

\n

.77<\/p>\n<\/td>\n

\n

.84<\/p>\n<\/td>\n

\n

.94<\/p>\n<\/td>\n<\/tr>\n

\n

1\/2<\/p>\n<\/td>\n

\n

7 1\/2<\/p>\n<\/td>\n

\n

15<\/p>\n<\/td>\n

\n

14<\/p>\n<\/td>\n

\n

13<\/p>\n<\/td>\n

\n

12 1\/2<\/p>\n<\/td>\n

\n

1.25<\/p>\n<\/td>\n

\n

1.5<\/p>\n<\/td>\n

\n

1.58<\/p>\n<\/td>\n

\n

1.65<\/p>\n<\/td>\n<\/tr>\n

\n

5\/8<\/p>\n<\/td>\n

\n

7 7\/8<\/p>\n<\/td>\n

\n

16<\/p>\n<\/td>\n

\n

14 3\/4<\/p>\n<\/td>\n

\n

14 7\/8<\/p>\n<\/td>\n

\n

14<\/p>\n<\/td>\n

\n

2.00<\/p>\n<\/td>\n

\n

2.35<\/p>\n<\/td>\n

\n

2.75<\/p>\n<\/td>\n

\n

3.09<\/p>\n<\/td>\n<\/tr>\n

\n

3\/4<\/p>\n<\/td>\n

\n

8 1\/4<\/p>\n<\/td>\n

\n

17<\/p>\n<\/td>\n

\n

17 1\/4<\/p>\n<\/td>\n

\n

16 1\/4<\/p>\n<\/td>\n

\n

14 7\/8<\/p>\n<\/td>\n

\n

3.19<\/p>\n<\/td>\n

\n

3.99<\/p>\n<\/td>\n

\n

4.29<\/p>\n<\/td>\n

\n

4.56<\/p>\n<\/td>\n<\/tr>\n

\n

7\/8<\/p>\n<\/td>\n

\n

8 5\/8<\/p>\n<\/td>\n

\n

17<\/p>\n<\/td>\n

\n

18<\/p>\n<\/td>\n

\n

16 1\/4<\/p>\n<\/td>\n

\n

14 1\/4<\/p>\n<\/td>\n

\n

6.00<\/p>\n<\/td>\n

\n

6.16<\/p>\n<\/td>\n

\n

6.28<\/p>\n<\/td>\n

\n

6.48<\/p>\n<\/td>\n<\/tr>\n

\n

1<\/p>\n<\/td>\n

\n

.9<\/p>\n<\/td>\n

\n

18<\/p>\n<\/td>\n

\n

19 1\/4<\/p>\n<\/td>\n

\n

18 3\/4<\/p>\n<\/td>\n

\n

17 1\/2<\/p>\n<\/td>\n

\n

6.375<\/p>\n<\/td>\n

\n

8.73<\/p>\n<\/td>\n

\n

9.22<\/p>\n<\/td>\n

\n

9.66<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

**Round Eye Style<\/p>\n

 <\/p>\n

Turnbuckles, Closed Body<\/strong><\/h2>\n

with Electroline “FIEGE” rope socket<\/p>\n

Machined Series: Closed Body Clevis and Socket Turnbuckles<\/strong><\/p>\n

\"06-Poleline-Hardware-image-46\"<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Catalog Number<\/b><\/p>\n<\/td>\n

\n

Dimensions (inches)<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

Rope Size<\/b><\/p>\n<\/td>\n

\n

Self-Colored Steel<\/b><\/p>\n<\/td>\n

\n

Zinc Plated Steel<\/b><\/p>\n<\/td>\n

\n

Stainless Steel<\/b><\/p>\n<\/td>\n

\n

A<\/b><\/p>\n<\/td>\n

\n

B<\/b><\/p>\n<\/td>\n

\n

C Min<\/b><\/p>\n<\/td>\n

\n

D<\/b><\/p>\n<\/td>\n

\n

E<\/b><\/p>\n<\/td>\n

\n

F<\/b><\/p>\n<\/td>\n

\n

Takeup (Inches)<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

1\/16<\/p>\n<\/td>\n

\n

ID-406<\/p>\n<\/td>\n

\n

ID-406<\/p>\n<\/td>\n

\n

IS-406<\/p>\n<\/td>\n

\n

17\/64<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n

\n

6-5\/16<\/p>\n<\/td>\n

\n

7\/16<\/p>\n<\/td>\n

\n

3\/16<\/p>\n<\/td>\n

\n

3\/16<\/p>\n<\/td>\n

\n

2-1\/2<\/p>\n<\/td>\n<\/tr>\n

\n

3\/32<\/p>\n<\/td>\n

\n

ID-409<\/p>\n<\/td>\n

\n

ID-409<\/p>\n<\/td>\n

\n

IS-409<\/p>\n<\/td>\n

\n

5\/16<\/p>\n<\/td>\n

\n

1\/2<\/p>\n<\/td>\n

\n

7-11\/16<\/p>\n<\/td>\n

\n

9\/16<\/p>\n<\/td>\n

\n

1\/4<\/p>\n<\/td>\n

\n

1\/4<\/p>\n<\/td>\n

\n

2-7\/8<\/p>\n<\/td>\n<\/tr>\n

\n

1\/8<\/p>\n<\/td>\n

\n

ID-412<\/p>\n<\/td>\n

\n

ID-412<\/p>\n<\/td>\n

\n

IS-412<\/p>\n<\/td>\n

\n

5\/16<\/p>\n<\/td>\n

\n

1\/2<\/p>\n<\/td>\n

\n

7-11\/16<\/p>\n<\/td>\n

\n

9\/16<\/p>\n<\/td>\n

\n

1\/4<\/p>\n<\/td>\n

\n

1\/4<\/p>\n<\/td>\n

\n

2-7\/8<\/p>\n<\/td>\n<\/tr>\n

\n

5\/32<\/p>\n<\/td>\n

\n

ID-415<\/p>\n<\/td>\n

\n

ID-415<\/p>\n<\/td>\n

\n

IS-415<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

9-1\/2<\/p>\n<\/td>\n

\n

11\/16<\/p>\n<\/td>\n

\n

5\/16<\/p>\n<\/td>\n

\n

5\/16<\/p>\n<\/td>\n

\n

3-1\/8<\/p>\n<\/td>\n<\/tr>\n

\n

3\/16<\/p>\n<\/td>\n

\n

ID-418<\/p>\n<\/td>\n

\n

ID-418<\/p>\n<\/td>\n

\n

IS-418<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

9-1\/2<\/p>\n<\/td>\n

\n

11\/16<\/p>\n<\/td>\n

\n

5\/16<\/p>\n<\/td>\n

\n

5\/16<\/p>\n<\/td>\n

\n

3-1\/8<\/p>\n<\/td>\n<\/tr>\n

\n

7\/32<\/p>\n<\/td>\n

\n

ID-421<\/p>\n<\/td>\n

\n

ID-418<\/p>\n<\/td>\n

\n

IS-418<\/p>\n<\/td>\n

\n

15\/32<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

10-15\/16<\/p>\n<\/td>\n

\n

7\/8<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n

\n

4-13\/16<\/p>\n<\/td>\n<\/tr>\n

\n

1\/4<\/p>\n<\/td>\n

\n

ID-425<\/p>\n<\/td>\n

\n

ID-425<\/p>\n<\/td>\n

\n

IS-425<\/p>\n<\/td>\n

\n

15\/32<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

10-15\/16<\/p>\n<\/td>\n

\n

7\/8<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n

\n

4-13\/16<\/p>\n<\/td>\n<\/tr>\n

\n

9\/32<\/p>\n<\/td>\n

\n

ID-428<\/p>\n<\/td>\n

\n

ID-428<\/p>\n<\/td>\n

\n

IS-428<\/p>\n<\/td>\n

\n

17\/32<\/p>\n<\/td>\n

\n

7\/8<\/p>\n<\/td>\n

\n

11-11\/16<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n

\n

7\/16<\/p>\n<\/td>\n

\n

4-9\/16<\/p>\n<\/td>\n<\/tr>\n

\n

5\/16<\/p>\n<\/td>\n

\n

ID-431<\/p>\n<\/td>\n

\n

ID-431<\/p>\n<\/td>\n

\n

IS-431<\/p>\n<\/td>\n

\n

17\/32<\/p>\n<\/td>\n

\n

7\/8<\/p>\n<\/td>\n

\n

11-11\/16<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n

\n

7\/16<\/p>\n<\/td>\n

\n

4-9\/16<\/p>\n<\/td>\n<\/tr>\n

\n

3\/8<\/p>\n<\/td>\n

\n

ID-437<\/p>\n<\/td>\n

\n

ID-437<\/p>\n<\/td>\n

\n

IS-437<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

13-1\/4<\/p>\n<\/td>\n

\n

1-1\/8<\/p>\n<\/td>\n

\n

7\/16<\/p>\n<\/td>\n

\n

1\/2<\/p>\n<\/td>\n

\n

5-5\/16<\/p>\n<\/td>\n<\/tr>\n

\n

7\/16<\/p>\n<\/td>\n

\n

ID-443<\/p>\n<\/td>\n

\n

ID-443<\/p>\n<\/td>\n

\n

IS-443<\/p>\n<\/td>\n

\n

23\/32<\/p>\n<\/td>\n

\n

1-1\/4<\/p>\n<\/td>\n

\n

17-7\/32<\/p>\n<\/td>\n

\n

1-5\/16<\/p>\n<\/td>\n

\n

7\/16<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

8-1\/16<\/p>\n<\/td>\n<\/tr>\n

\n

1\/2<\/p>\n<\/td>\n

\n

ID-450<\/p>\n<\/td>\n

\n

ID-450<\/p>\n<\/td>\n

\n

IS-450<\/p>\n<\/td>\n

\n

51\/64<\/p>\n<\/td>\n

\n

1-3\/8<\/p>\n<\/td>\n

\n

17-3\/4<\/p>\n<\/td>\n

\n

1-1\/2<\/p>\n<\/td>\n

\n

1\/2<\/p>\n<\/td>\n

\n

11\/16<\/p>\n<\/td>\n

\n

8-1\/16<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Note: A swaged turnbuckle body may be substituted for smaller rope sizes, resulting in an overall length slightly longer than indicated.<\/p>\n

Machined Series: Closed Body Double Socket Turnbuckles<\/strong><\/h2>\n

\"06-Poleline-Hardware-image-47\"<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Catalog Number<\/b><\/p>\n<\/td>\n

\n

Dimensions\u00a0 (Inches)<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

Rope Size<\/b><\/p>\n<\/td>\n

\n

Self Colored Steel<\/b><\/p>\n<\/td>\n

\n

Zinc Plated Steel<\/b><\/p>\n<\/td>\n

\n

Stainless Steel<\/b><\/p>\n<\/td>\n

\n

C Min<\/b><\/p>\n<\/td>\n

\n

D<\/b><\/p>\n<\/td>\n

\n

Take-up (Inches)<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

1\/16<\/p>\n<\/td>\n

\n

ID-5506-N<\/p>\n<\/td>\n

\n

ID-5506-V<\/p>\n<\/td>\n

\n

IS-5506<\/p>\n<\/td>\n

\n

6-3\/8<\/p>\n<\/td>\n

\n

7\/16<\/p>\n<\/td>\n

\n

2-1\/2<\/p>\n<\/td>\n<\/tr>\n

\n

3\/32<\/p>\n<\/td>\n

\n

ID-5509-N<\/p>\n<\/td>\n

\n

ID-5509-V<\/p>\n<\/td>\n

\n

IS-5509<\/p>\n<\/td>\n

\n

7-1\/4<\/p>\n<\/td>\n

\n

9\/16<\/p>\n<\/td>\n

\n

2-7\/8<\/p>\n<\/td>\n<\/tr>\n

\n

1\/8<\/p>\n<\/td>\n

\n

ID-5512-N<\/p>\n<\/td>\n

\n

ID-5512-N<\/p>\n<\/td>\n

\n

IS-5512<\/p>\n<\/td>\n

\n

7-1\/4<\/p>\n<\/td>\n

\n

9\/16<\/p>\n<\/td>\n

\n

2-7\/8<\/p>\n<\/td>\n<\/tr>\n

\n

5\/32<\/p>\n<\/td>\n

\n

ID-5515-N<\/p>\n<\/td>\n

\n

ID-5515-V<\/p>\n<\/td>\n

\n

IS-5515<\/p>\n<\/td>\n

\n

8-5\/8<\/p>\n<\/td>\n

\n

11\/16<\/p>\n<\/td>\n

\n

3-1\/8<\/p>\n<\/td>\n<\/tr>\n

\n

3\/16<\/p>\n<\/td>\n

\n

ID-5518-N<\/p>\n<\/td>\n

\n

ID-5518-V<\/p>\n<\/td>\n

\n

IS-5518<\/p>\n<\/td>\n

\n

8-5\/8<\/p>\n<\/td>\n

\n

11\/16<\/p>\n<\/td>\n

\n

3-1\/8<\/p>\n<\/td>\n<\/tr>\n

\n

\/32<\/p>\n<\/td>\n

\n

ID-5521-N<\/p>\n<\/td>\n

\n

ID-5521-V<\/p>\n<\/td>\n

\n

IS-5521<\/p>\n<\/td>\n

\n

11-7\/8<\/p>\n<\/td>\n

\n

7\/8<\/p>\n<\/td>\n

\n

4-13\/16<\/p>\n<\/td>\n<\/tr>\n

\n

1\/4<\/p>\n<\/td>\n

\n

ID-5525-N<\/p>\n<\/td>\n

\n

ID-5525-V<\/p>\n<\/td>\n

\n

IS-5525<\/p>\n<\/td>\n

\n

11-7\/8<\/p>\n<\/td>\n

\n

7\/8<\/p>\n<\/td>\n

\n

4-13\/16<\/p>\n<\/td>\n<\/tr>\n

\n

9\/32<\/p>\n<\/td>\n

\n

ID-5528-N<\/p>\n<\/td>\n

\n

ID-5528-V<\/p>\n<\/td>\n

\n

IS-5528<\/p>\n<\/td>\n

\n

12-7\/8<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

4-9\/16<\/p>\n<\/td>\n<\/tr>\n

\n

5\/16<\/p>\n<\/td>\n

\n

ID-5531-N<\/p>\n<\/td>\n

\n

ID-5531-V<\/p>\n<\/td>\n

\n

IS-5531<\/p>\n<\/td>\n

\n

12-7\/8<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

4-9\/16<\/p>\n<\/td>\n<\/tr>\n

\n

3\/8<\/p>\n<\/td>\n

\n

ID-5537-N<\/p>\n<\/td>\n

\n

ID-5537-V<\/p>\n<\/td>\n

\n

IS-553<\/p>\n<\/td>\n

\n

14-1\/2<\/p>\n<\/td>\n

\n

1-1\/8<\/p>\n<\/td>\n

\n

5-5\/16<\/p>\n<\/td>\n<\/tr>\n

\n

7\/16<\/p>\n<\/td>\n

\n

ID-5543-N<\/p>\n<\/td>\n

\n

ID-5543-V<\/p>\n<\/td>\n

\n

IS-5543<\/p>\n<\/td>\n

\n

18-5\/8<\/p>\n<\/td>\n

\n

1-5\/16<\/p>\n<\/td>\n

\n

8-1\/16<\/p>\n<\/td>\n<\/tr>\n

\n

1\/2<\/p>\n<\/td>\n

\n

ID-5550-N<\/p>\n<\/td>\n

\n

ID-5550-V<\/p>\n<\/td>\n

\n

IS-5550<\/p>\n<\/td>\n

\n

19-1\/4<\/p>\n<\/td>\n

\n

1-1\/2<\/p>\n<\/td>\n

\n

8-1\/16<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Note: A swaged turnbuckle body may be substituted for smaller rope sizes, resulting in a slightly longer overall length.<\/p>\n

Machined Series: Closed Body Double Clevis Turnbuckle<\/strong><\/h2>\n

\"06-Poleline-Hardware-image-48\"<\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Catalog Number<\/b><\/p>\n<\/td>\n

\n

Dimensions (inches)<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

Rope Size<\/b><\/p>\n<\/td>\n

\n

Self-Colored Steel<\/b><\/p>\n<\/td>\n

\n

Zinc Plated Steel<\/b><\/p>\n<\/td>\n

\n

Stainless Steel<\/b><\/p>\n<\/td>\n

\n

A<\/b><\/p>\n<\/td>\n

\n

B<\/b><\/p>\n<\/td>\n

\n

C Min<\/b><\/p>\n<\/td>\n

\n

D<\/b><\/p>\n<\/td>\n

\n

E<\/b><\/p>\n<\/td>\n

\n

F<\/b><\/p>\n<\/td>\n

\n

Takeup (Inches)<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

1\/16<\/p>\n<\/td>\n

\n

IjD-406-N<\/p>\n<\/td>\n

\n

IJD-406-V<\/p>\n<\/td>\n

\n

IJS-406<\/p>\n<\/td>\n

\n

17\/64<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n

\n

5-5\/32<\/p>\n<\/td>\n

\n

21\/32<\/p>\n<\/td>\n

\n

3\/16<\/p>\n<\/td>\n

\n

3\/16<\/p>\n<\/td>\n

\n

2-1\/2<\/p>\n<\/td>\n<\/tr>\n

\n

3\/32<\/p>\n<\/td>\n

\n

IJD-409-N<\/p>\n<\/td>\n

\n

IJD-409-V<\/p>\n<\/td>\n

\n

IJS-409<\/p>\n<\/td>\n

\n

5\/16<\/p>\n<\/td>\n

\n

1\/2<\/p>\n<\/td>\n

\n

6-1\/4<\/p>\n<\/td>\n

\n

13\/16<\/p>\n<\/td>\n

\n

1\/4<\/p>\n<\/td>\n

\n

1\/4<\/p>\n<\/td>\n

\n

2-7\/8<\/p>\n<\/td>\n<\/tr>\n

\n

1\/8<\/p>\n<\/td>\n

\n

IJD-412-N<\/p>\n<\/td>\n

\n

IJD-412-V<\/p>\n<\/td>\n

\n

IJS-412<\/p>\n<\/td>\n

\n

5\/16<\/p>\n<\/td>\n

\n

1\/2<\/p>\n<\/td>\n

\n

6-1\/4<\/p>\n<\/td>\n

\n

13\/16<\/p>\n<\/td>\n

\n

1\/4<\/p>\n<\/td>\n

\n

1\/4<\/p>\n<\/td>\n

\n

2-7\/8<\/p>\n<\/td>\n<\/tr>\n

\n

5\/32<\/p>\n<\/td>\n

\n

IJD-415-N<\/p>\n<\/td>\n

\n

IJD-415-V<\/p>\n<\/td>\n

\n

IJS-415<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

7-5\/16<\/p>\n<\/td>\n

\n

15\/16<\/p>\n<\/td>\n

\n

5\/16<\/p>\n<\/td>\n

\n

5\/16<\/p>\n<\/td>\n

\n

3-1\/8<\/p>\n<\/td>\n<\/tr>\n

\n

3\/16<\/p>\n<\/td>\n

\n

IJD-418-N<\/p>\n<\/td>\n

\n

IJD-418-V<\/p>\n<\/td>\n

\n

IJS-418<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

7-5\/16<\/p>\n<\/td>\n

\n

15\/16<\/p>\n<\/td>\n

\n

5\/16<\/p>\n<\/td>\n

\n

5\/16<\/p>\n<\/td>\n

\n

3-1\/8<\/p>\n<\/td>\n<\/tr>\n

\n

7\/32<\/p>\n<\/td>\n

\n

IJD-421-N<\/p>\n<\/td>\n

\n

IJD-418-V<\/p>\n<\/td>\n

\n

IJS-418<\/p>\n<\/td>\n

\n

15\/32<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

10<\/p>\n<\/td>\n

\n

1-1\/8<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n

\n

4-13\/16<\/p>\n<\/td>\n<\/tr>\n

\n

1\/4<\/p>\n<\/td>\n

\n

IJD-425-N<\/p>\n<\/td>\n

\n

IJD-425-V<\/p>\n<\/td>\n

\n

IJS-425<\/p>\n<\/td>\n

\n

15\/32<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

10<\/p>\n<\/td>\n

\n

1-1\/8<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n

\n

4-13\/16<\/p>\n<\/td>\n<\/tr>\n

\n

9\/32<\/p>\n<\/td>\n

\n

IJD-428-N<\/p>\n<\/td>\n

\n

IJD-428-V<\/p>\n<\/td>\n

\n

IJS-428<\/p>\n<\/td>\n

\n

17\/32<\/p>\n<\/td>\n

\n

7\/8<\/p>\n<\/td>\n

\n

10-1\/2<\/p>\n<\/td>\n

\n

1-5\/16<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n

\n

7\/16<\/p>\n<\/td>\n

\n

4-9\/16<\/p>\n<\/td>\n<\/tr>\n

\n

5\/16<\/p>\n<\/td>\n

\n

IJD-431-N<\/p>\n<\/td>\n

\n

IJD-431-V<\/p>\n<\/td>\n

\n

IJS-431<\/p>\n<\/td>\n

\n

17\/32<\/p>\n<\/td>\n

\n

7\/8<\/p>\n<\/td>\n

\n

10-1\/2<\/p>\n<\/td>\n

\n

1-5\/16<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n

\n

7\/16<\/p>\n<\/td>\n

\n

4-9\/16<\/p>\n<\/td>\n<\/tr>\n

\n

3\/8<\/p>\n<\/td>\n

\n

IJD-437-N<\/p>\n<\/td>\n

\n

IJD-437-V<\/p>\n<\/td>\n

\n

IJS-437<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

12<\/p>\n<\/td>\n

\n

1-7\/16<\/p>\n<\/td>\n

\n

1\/2<\/p>\n<\/td>\n

\n

1\/2<\/p>\n<\/td>\n

\n

5-5\/16<\/p>\n<\/td>\n<\/tr>\n

\n

7\/16<\/p>\n<\/td>\n

\n

IJD-443-N<\/p>\n<\/td>\n

\n

IJD-443-V<\/p>\n<\/td>\n

\n

IJS-443<\/p>\n<\/td>\n

\n

23\/32<\/p>\n<\/td>\n

\n

1-1\/4<\/p>\n<\/td>\n

\n

15-13\/16<\/p>\n<\/td>\n

\n

1-5\/8<\/p>\n<\/td>\n

\n

7\/16<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

8-1\/16<\/p>\n<\/td>\n<\/tr>\n

\n

1\/2<\/p>\n<\/td>\n

\n

IJD-450-N<\/p>\n<\/td>\n

\n

IJD-450-V<\/p>\n<\/td>\n

\n

IJS-450<\/p>\n<\/td>\n

\n

51\/64<\/p>\n<\/td>\n

\n

1-3\/8<\/p>\n<\/td>\n

\n

16-7\/32<\/p>\n<\/td>\n

\n

1-5\/8<\/p>\n<\/td>\n

\n

1\/2<\/p>\n<\/td>\n

\n

11\/16<\/p>\n<\/td>\n

\n

8-1\/16<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

Note: A swaged turnbuckle body may be substituted for smaller rope sizes, resulting in a slightly longer overall length.<\/p>\n

 <\/p>\n

Ball Bearing Swivels, Gold Band Angular Contact<\/strong><\/h2>\n

\"06-Poleline-Hardware-image-49\"<\/p>\n

Streamlined design and maximum performance
\n*Designed for high rotational speeds, these models react to low operational torque…the perfect swivels for longer ropes & cables.
\n*Manufactured with two or more flush ground angular contact ball bearings.
\n*Bearings are permanently lubricated with high-pressure grease and sealed at the factory.
\n*Flush pins are available for overhead and underground electrical line stringing (please specify). Swivel ends are shaped to prevent snagging when gliding over sheaves and other potential obstructions.
\n*Heat-treated high strength alloy steel, zinc plated for corrosion resistance, provides the strongest yet lightest swivel available. Ultimate strength is minimum 4.5 to 1 over SWL (Safe Working Load).
\n*All swivels proof tested and certified.<\/p>\n

6000 Series Gold Band Swivels<\/strong><\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Size<\/b><\/p>\n<\/td>\n

\n

SWL Tons<\/b><\/p>\n<\/td>\n

\n

Wire Rope Size<\/b><\/p>\n<\/td>\n

\n

A<\/b><\/p>\n<\/td>\n

\n

C Pin Dia.<\/b><\/p>\n<\/td>\n

\n

D<\/b><\/p>\n<\/td>\n

\n

E<\/b><\/p>\n<\/td>\n

\n

F<\/b><\/p>\n<\/td>\n

\n

G<\/b><\/p>\n<\/td>\n

\n

H<\/b><\/p>\n<\/td>\n

\n

I<\/b><\/p>\n<\/td>\n

\n

J Hole Dia.<\/b><\/p>\n<\/td>\n

\n

K<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

12<\/p>\n<\/td>\n

\n

.5<\/p>\n

(.9)<\/p>\n<\/td>\n

\n

1\/8<\/p>\n<\/td>\n

\n

7\/8<\/p>\n<\/td>\n

\n

5\/16<\/p>\n<\/td>\n

\n

5\/16<\/p>\n<\/td>\n

\n

1\/4<\/p>\n<\/td>\n

\n

15\/32<\/p>\n<\/td>\n

\n

7\/8<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n

\n

1\/4<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n<\/tr>\n

\n

25<\/p>\n<\/td>\n

\n

.75<\/p>\n

(2)<\/p>\n<\/td>\n

\n

1\/4<\/p>\n<\/td>\n

\n

1-1\/4<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n

\n

19\/32<\/p>\n<\/td>\n

\n

5\/16<\/p>\n<\/td>\n

\n

11\/16<\/p>\n<\/td>\n

\n

31\/321<\/p>\n<\/td>\n

\n

1\/2<\/p>\n<\/td>\n

\n

7\/16<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n

\n

7\/16<\/p>\n<\/td>\n<\/tr>\n

\n

37<\/p>\n<\/td>\n

\n

1.5<\/p>\n

(4)<\/p>\n<\/td>\n

\n

3\/8<\/p>\n<\/td>\n

\n

1-1\/2<\/p>\n<\/td>\n

\n

7\/16<\/p>\n<\/td>\n

\n

19\/32<\/p>\n<\/td>\n

\n

1\/2<\/p>\n<\/td>\n

\n

13\/16<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

23\/32<\/p>\n<\/td>\n

\n

9\/16<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n<\/tr>\n

\n

50<\/p>\n<\/td>\n

\n

3<\/p>\n

(5)<\/p>\n<\/td>\n

\n

1\/2<\/p>\n<\/td>\n

\n

1-7\/8<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

15\/16<\/p>\n<\/td>\n

\n

1-11\/32<\/p>\n<\/td>\n

\n

05\/16<\/p>\n<\/td>\n

\n

13\/16<\/p>\n<\/td>\n

\n

7\/8<\/p>\n<\/td>\n

\n

15\/16<\/p>\n<\/td>\n<\/tr>\n

\n

62<\/p>\n<\/td>\n

\n

5<\/p>\n

(8)<\/p>\n<\/td>\n

\n

5\/8<\/p>\n<\/td>\n

\n

2-7\/16<\/p>\n<\/td>\n

\n

7\/8<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

1-9\/16<\/p>\n<\/td>\n

\n

1-11\/16<\/p>\n<\/td>\n

\n

1-5\/16<\/p>\n<\/td>\n

\n

1-1\/8<\/p>\n<\/td>\n

\n

1-1\/4<\/p>\n<\/td>\n

\n

1-3\/16<\/p>\n<\/td>\n<\/tr>\n

\n

75<\/p>\n<\/td>\n

\n

8.5<\/p>\n

(15)<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

2-7\/8<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

1-9\/32<\/p>\n<\/td>\n

\n

1-1\/4<\/p>\n<\/td>\n

\n

2-1\/8<\/p>\n<\/td>\n

\n

2-1\/4<\/p>\n<\/td>\n

\n

1-5\/8<\/p>\n<\/td>\n

\n

1-1\/4<\/p>\n<\/td>\n

\n

1-3\/8<\/p>\n<\/td>\n

\n

1-1\/2<\/p>\n<\/td>\n<\/tr>\n

\n

81<\/p>\n<\/td>\n

\n

8.5<\/p>\n

(15)<\/p>\n<\/td>\n

\n

3\/4<\/p>\n<\/td>\n

\n

2-7\/8<\/p>\n<\/td>\n

\n

1-1\/8<\/p>\n<\/td>\n

\n

1-9\/16<\/p>\n<\/td>\n

\n

1-1\/4<\/p>\n<\/td>\n

\n

2-1\/8<\/p>\n<\/td>\n

\n

2-1\/4<\/p>\n<\/td>\n

\n

1-5\/8<\/p>\n<\/td>\n

\n

1-1\/4<\/p>\n<\/td>\n

\n

1-3\/8<\/p>\n<\/td>\n

\n

1-1\/2<\/p>\n<\/td>\n<\/tr>\n

\n

87<\/p>\n<\/td>\n

\n

10<\/p>\n

(17)<\/p>\n<\/td>\n

\n

7\/8<\/p>\n<\/td>\n

\n

3-5\/8<\/p>\n<\/td>\n

\n

1-1\/2<\/p>\n<\/td>\n

\n

1-3\/4<\/p>\n<\/td>\n

\n

1-23\/32<\/p>\n<\/td>\n

\n

3-1\/2<\/p>\n<\/td>\n

\n

3<\/p>\n<\/td>\n

\n

2-27\/32<\/p>\n<\/td>\n

\n

1-3\/4<\/p>\n<\/td>\n

\n

1-5\/8<\/p>\n<\/td>\n

\n

1-13\/16<\/p>\n<\/td>\n<\/tr>\n

\n

99<\/p>\n<\/td>\n

\n

15<\/p>\n

(20)<\/p>\n<\/td>\n

\n

1<\/p>\n<\/td>\n

\n

3-5\/8<\/p>\n<\/td>\n

\n

1-1\/2<\/p>\n<\/td>\n

\n

1-3\/4<\/p>\n<\/td>\n

\n

2<\/p>\n<\/td>\n

\n

3-1\/2<\/p>\n<\/td>\n

\n

3<\/p>\n<\/td>\n

\n

2-25\/32<\/p>\n<\/td>\n

\n

1-3\/4<\/p>\n<\/td>\n

\n

2<\/p>\n<\/td>\n

\n

2-1\/8<\/p>\n<\/td>\n<\/tr>\n

\n

150<\/p>\n<\/td>\n

\n

35<\/p>\n<\/td>\n

\n

1-1\/2<\/p>\n<\/td>\n

\n

5-3\/8<\/p>\n<\/td>\n

\n

2<\/p>\n<\/td>\n

\n

2<\/p>\n<\/td>\n

\n

2-1\/4<\/p>\n<\/td>\n

\n

3-11\/16<\/p>\n<\/td>\n

\n

3-3\/4<\/p>\n<\/td>\n

\n

3-1\/8<\/p>\n<\/td>\n

\n

2-3\/8<\/p>\n<\/td>\n

\n

2-1\/4<\/p>\n<\/td>\n

\n

2-3\/8<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

All dimensions are in inches.
\nSpecifications could change without notice.
\n() For line stringing applications requiring a 3 to 1 Safe Working Load.<\/p>\n

Ball Bearing Swivels, Gold Band Angular Contact<\/strong><\/h2>\n

6000 Series Gold Band Swivels (Overall Length)<\/strong><\/p>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\n

Model<\/b><\/p>\n<\/td>\n

\n

60<\/b><\/p>\n<\/td>\n

\n

61<\/b><\/p>\n<\/td>\n

\n

62<\/b><\/p>\n<\/td>\n

\n

63<\/b><\/p>\n<\/td>\n

\n

67<\/b><\/p>\n<\/td>\n

\n

65\/68<\/b><\/p>\n<\/td>\n

\n

66<\/b><\/p>\n<\/td>\n

\n

67<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

Size<\/b><\/p>\n<\/td>\n

\n

*<\/b><\/p>\n<\/td>\n

\n

*<\/b><\/p>\n<\/td>\n

\n

*<\/b><\/p>\n<\/td>\n

\n

\u00a0<\/b><\/p>\n<\/td>\n

\n

\u00a0<\/b><\/p>\n<\/td>\n

\n

\u00a0<\/b><\/p>\n<\/td>\n

\n

\u00a0<\/b><\/p>\n<\/td>\n

\n

\u00a0<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

12<\/p>\n<\/td>\n

\n

5-5\/16<\/p>\n<\/td>\n

\n

5-3\/8<\/p>\n<\/td>\n

\n

5-3\/8<\/p>\n<\/td>\n

\n

3-7\/8<\/p>\n<\/td>\n

\n

3-7\/8<\/p>\n<\/td>\n

\n

3-1\/8<\/p>\n<\/td>\n

\n

3-1\/8<\/p>\n<\/td>\n

\n

3-1\/16<\/p>\n<\/td>\n<\/tr>\n

\n

25<\/p>\n<\/td>\n

\n

8-5\/16<\/p>\n<\/td>\n

\n

7-1\/16<\/p>\n<\/td>\n

\n

7-1\/8<\/p>\n<\/td>\n

\n

5-7\/8<\/p>\n<\/td>\n

\n

5-7\/8<\/p>\n<\/td>\n

\n

4-9\/16<\/p>\n<\/td>\n

\n

4-9\/16<\/p>\n<\/td>\n

\n

4-1\/2<\/p>\n<\/td>\n<\/tr>\n

\n

37<\/p>\n<\/td>\n

\n

9-1\/2<\/p>\n<\/td>\n

\n

7-7\/8<\/p>\n<\/td>\n

\n

7-13\/16<\/p>\n<\/td>\n

\n

6-13\/16<\/p>\n<\/td>\n

\n

6-13\/16<\/p>\n<\/td>\n

\n

5-1\/8<\/p>\n<\/td>\n

\n

5-1\/8<\/p>\n<\/td>\n

\n

5-1\/8<\/p>\n<\/td>\n<\/tr>\n

\n

50<\/p>\n<\/td>\n

\n

12-15\/16<\/p>\n<\/td>\n

\n

10-13\/16<\/p>\n<\/td>\n

\n

10-15\/16<\/p>\n<\/td>\n

\n

9-1\/8<\/p>\n<\/td>\n

\n

9-1\/8<\/p>\n<\/td>\n

\n

7-1\/8<\/p>\n<\/td>\n

\n

7-1\/8<\/p>\n<\/td>\n

\n

7-1\/8<\/p>\n<\/td>\n<\/tr>\n

\n

62<\/p>\n<\/td>\n

\n

17-9\/16<\/p>\n<\/td>\n

\n

15-1\/4<\/p>\n<\/td>\n

\n

15-1\/4<\/p>\n<\/td>\n

\n

12-13\/16<\/p>\n<\/td>\n

\n

12-13\/16<\/p>\n<\/td>\n

\n

10-1\/2<\/p>\n<\/td>\n

\n

10-1\/2<\/p>\n<\/td>\n

\n

10-1\/2<\/p>\n<\/td>\n<\/tr>\n

\n

75<\/p>\n<\/td>\n

\n

21-1\/8<\/p>\n<\/td>\n

\n

18-7\/8<\/p>\n<\/td>\n

\n

18-7\/8<\/p>\n<\/td>\n

\n

14-11\/16<\/p>\n<\/td>\n

\n

14-11\/16<\/p>\n<\/td>\n

\n

12-7\/16<\/p>\n<\/td>\n

\n

12-7\/16<\/p>\n<\/td>\n

\n

12-7\/16<\/p>\n<\/td>\n<\/tr>\n

\n

81<\/p>\n<\/td>\n

\n

21-1\/8<\/p>\n<\/td>\n

\n

18-7\/8<\/p>\n<\/td>\n

\n

18-7\/8<\/p>\n<\/td>\n

\n

14-11\/16<\/p>\n<\/td>\n

\n

14-11\/16<\/p>\n<\/td>\n

\n

12-7\/16<\/p>\n<\/td>\n

\n

12-7\/16<\/p>\n<\/td>\n

\n

12-7\/16<\/p>\n<\/td>\n<\/tr>\n

\n

87<\/p>\n<\/td>\n

\n

25-15\/16<\/p>\n<\/td>\n

\n

24-15\/16<\/p>\n<\/td>\n

\n

24-15\/16<\/p>\n<\/td>\n

\n

18<\/p>\n<\/td>\n

\n

18<\/p>\n<\/td>\n

\n

17<\/p>\n<\/td>\n

\n

17<\/p>\n<\/td>\n

\n

17<\/p>\n<\/td>\n<\/tr>\n

\n

99<\/p>\n<\/td>\n

\n

27-13\/16<\/p>\n<\/td>\n

\n

25-11\/16<\/p>\n<\/td>\n

\n

25-11\/16<\/p>\n<\/td>\n

\n

19-7\/8<\/p>\n<\/td>\n

\n

19-7\/8<\/p>\n<\/td>\n

\n

17-3\/4<\/p>\n<\/td>\n

\n

17-3\/4<\/p>\n<\/td>\n

\n

17-3\/4<\/p>\n<\/td>\n<\/tr>\n

\n

150<\/p>\n<\/td>\n

\n

44-1\/16<\/p>\n<\/td>\n

\n

34-5\/8<\/p>\n<\/td>\n

\n

34-5\/8<\/p>\n<\/td>\n

\n

30-7\/8<\/p>\n<\/td>\n

\n

30-7\/8<\/p>\n<\/td>\n

\n

22-3\/8<\/p>\n<\/td>\n

\n

21-7\/16<\/p>\n<\/td>\n

\n

21\/7\/16<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n

*T inside of hook
\nAll dimensions are in inches.
\nSpecifications could change without notice.<\/p>\n

Rope Thimble Swivels<\/strong><\/h2>\n

T\"06-Poleline-Hardware-image-50\"he best method of attaching a wire or synthetic rope to a swivel is with our FIEGE fitting available on models 60, 63, and 64. If you prefer to use a thimble with clips, we recommend solid core thimbles shown here. These cast steel thimbles are zinc plated and designed to limit rope wear by preventing the rope from extending beyond the diameter of the swivel.<\/p>\n\n\n\n\n\n\n\n\n
\n

Rope Size<\/b><\/p>\n<\/td>\n

\n

Thimble #<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

1\/2<\/p>\n<\/td>\n

\n

L713-4<\/p>\n<\/td>\n<\/tr>\n

\n

5\/8<\/p>\n<\/td>\n

\n

L713-5<\/p>\n<\/td>\n<\/tr>\n

\n

3\/4<\/p>\n<\/td>\n

\n

L713-9<\/p>\n<\/td>\n<\/tr>\n

\n

7\/8<\/p>\n<\/td>\n

\n

L713-8<\/p>\n<\/td>\n<\/tr>\n

\n

1<\/p>\n<\/td>\n

\n

L713-8<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n","protected":false},"excerpt":{"rendered":"

Anchor Rods Strand Eye (Stainless Steel Type 316) Rolled threads are furnished on all rods up to and including 3\/4″ diameter. One inch and larger threads. Length of threads 3 1\/2″. Manufactured to ANSI standards. All eyes shown to be … Continue reading →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"open","template":"page-products.php","meta":{"spay_email":""},"jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/P8HaVP-V","jetpack-related-posts":[{"id":751,"url":"http:\/\/www.pwrmfg.com\/power-manufacturing\/fasteners\/double-arming-eye-bolts\/","url_meta":{"origin":57,"position":0},"title":"Double Arming Eye Bolts","date":"March 24, 2015","format":false,"excerpt":"Please Note: EYE RODS \/ EYE BOLTS:\u00a0Eye Bolts and Anchor Rods will not look exactly like catalog drawings. Generally all eyes will be investment cast or forged tear drop oval eye or thimble eye shaped nuts attached to double end stud or rod and be a little larger than the\u2026","rel":"","context":"Similar post","img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":743,"url":"http:\/\/www.pwrmfg.com\/power-manufacturing\/oval-eye-bolts\/","url_meta":{"origin":57,"position":1},"title":"Oval Eye Bolts","date":"March 24, 2015","format":false,"excerpt":"Please Note: EYE RODS \/ EYE BOLTS:\u00a0Eye Bolts and Anchor \u00a0 \u00a0 Rods will not look exactly like catalog drawings. Generally all eyes will be investment cast or forged tear drop oval eye or thimble eye shaped nuts attached to double end stud or rod and be a little larger\u2026","rel":"","context":"Similar post","img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":764,"url":"http:\/\/www.pwrmfg.com\/power-manufacturing\/fasteners\/screw-eye-bolts\/","url_meta":{"origin":57,"position":2},"title":"Screw Eye Bolts","date":"March 24, 2015","format":false,"excerpt":"Please Note: EYE RODS \/ EYE BOLTS:\u00a0Eye Bolts and Anchor Rods will not look exactly like catalog drawings. Generally all eyes will be investment cast or forged tear drop oval eye or thimble eye shaped nuts attached to double end stud or rod and be a little larger than the\u2026","rel":"","context":"Similar post","img":{"alt_text":"07-Fasteners-image-10","src":"https:\/\/i1.wp.com\/www.pwrmfg.com\/power-manufacturing\/wp-content\/uploads\/2013\/03\/07-Fasteners-image-10.jpg?resize=350%2C200","width":350,"height":200},"classes":[]},{"id":36,"url":"http:\/\/www.pwrmfg.com\/power-manufacturing\/custom-work\/","url_meta":{"origin":57,"position":3},"title":"Custom Work","date":"March 12, 2013","format":false,"excerpt":"ORDERING CUSTOM ITEMS: PWRMFG\u2019s quoted prices for custom made products are based on the stated quantities, existing material and labor cost. Changes in order quantities for custom products may change the quoted pricing. This makes it very important for order quantities to be correct before asking for prices or entering\u2026","rel":"","context":"Similar post","img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":53,"url":"http:\/\/www.pwrmfg.com\/power-manufacturing\/all-products\/","url_meta":{"origin":57,"position":4},"title":"Table of Contents","date":"March 19, 2013","format":false,"excerpt":"\u00a0 \u00a0 Section 1 \u2013 Products Section 2 \u2013 Table of Contents & New Products\u00a0 Section 3 \u2013 Specifications 03A- Specifications For Stainless Steel Bolts, Nuts, Washers, and Cast For Pole Line Hardware 03B - Standard Specification for Stainless Steel Wire Strand 03C - The Care and Cleanings Of Stainless\u2026","rel":"","context":"Similar post","img":{"alt_text":"Power manufacturing heading","src":"https:\/\/i1.wp.com\/www.pwrmfg.com\/power-manufacturing\/wp-content\/uploads\/2013\/03\/Power-manufacturing-heading.png?resize=350%2C200","width":350,"height":200},"classes":[]},{"id":58,"url":"http:\/\/www.pwrmfg.com\/power-manufacturing\/fasteners\/","url_meta":{"origin":57,"position":5},"title":"Fasteners","date":"March 19, 2013","format":false,"excerpt":"\u00a0Below is a list of our Fastener products\u00a0 Please click on a link for further information Square Head Machine Bolts\u00a0 Hex Head Machine Bolts\u00a0 Carriage Bolts\u00a0 Brace Bolts\u00a0 Shoulder Eye Bolts\u00a0 Oval Eye Bolts\u00a0 Thimble Eye Bolts Double Arming Eye Bolts Double Arming Bolts Cotter Bolts\u00a0 Lag Screws\u00a0 Screw Eye\u2026","rel":"","context":"Similar post","img":{"alt_text":"Power manufacturing heading","src":"https:\/\/i1.wp.com\/www.pwrmfg.com\/power-manufacturing\/wp-content\/uploads\/2013\/03\/Power-manufacturing-heading.png?resize=350%2C200","width":350,"height":200},"classes":[]}],"_links":{"self":[{"href":"http:\/\/www.pwrmfg.com\/power-manufacturing\/wp-json\/wp\/v2\/pages\/57"}],"collection":[{"href":"http:\/\/www.pwrmfg.com\/power-manufacturing\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"http:\/\/www.pwrmfg.com\/power-manufacturing\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"http:\/\/www.pwrmfg.com\/power-manufacturing\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.pwrmfg.com\/power-manufacturing\/wp-json\/wp\/v2\/comments?post=57"}],"version-history":[{"count":64,"href":"http:\/\/www.pwrmfg.com\/power-manufacturing\/wp-json\/wp\/v2\/pages\/57\/revisions"}],"predecessor-version":[{"id":116,"href":"http:\/\/www.pwrmfg.com\/power-manufacturing\/wp-json\/wp\/v2\/pages\/57\/revisions\/116"}],"wp:attachment":[{"href":"http:\/\/www.pwrmfg.com\/power-manufacturing\/wp-json\/wp\/v2\/media?parent=57"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}