{"id":255,"date":"2013-04-01T18:27:17","date_gmt":"2013-04-01T18:27:17","guid":{"rendered":"http:\/\/www.pwrmfg.com\/power-manufacturing\/?page_id=255"},"modified":"2021-04-14T23:00:55","modified_gmt":"2021-04-14T23:00:55","slug":"anchor-bolts","status":"publish","type":"page","link":"http:\/\/www.pwrmfg.com\/power-manufacturing\/anchor-bolts\/","title":{"rendered":"Anchor Bolts"},"content":{"rendered":"

\"ANCHOR_BOLT_TYPES\"<\/a><\/b>Specifications\u00a0<\/b><\/span><\/p>\n

F1554 was introduced in 1994. This is the newest fastener specification by the American Society for Testing and Material (ASTM). F1554 covers anchor bolts designed to anchor structural supports to concrete foundations. The chemical requirements, mechanical properties, and dimensional tolerance are all encompassed under the F1554 specifications.<\/p>\n

F1554 anchor bolts can be manufactured with cut or rolled threads per the customer\u2019s specifications.<\/p>\n

Grades<\/b><\/p>\n\n\n\n\n\n
F1554 Grade 36<\/b><\/span><\/span><\/b><\/td>\nLow carbon, 36 ksi minimum yield strength.<\/td>\n<\/tr>\n
F1554 Grade 55<\/b><\/span><\/b><\/span><\/td>\nLow alloy, 55 ksi minimum yield strength.<\/td>\n<\/tr>\n
F1554 Grade 105<\/b><\/span><\/span><\/b><\/td>\nAlloy, heat-treated, high strength 105 ksi minimum yield strength.<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

S1. Grade 55 Bars & Anchor Bolts<\/b><\/p>\n

The material that is covered under Supplementary Requirement S1 is suitable for welding. S1 confirms the material is suitable for welding by the restrictions for the chemical composition, and the carbon equivalent formula.<\/p>\n

S2. Permanent Manufacturer\u2019s Identification <\/b><\/p>\n

When permanent manufacturer\u2019s identification (S2) is required, the end of the anchor bolt protruding from the concrete shall be steel die stamped. The following identification marker, designed specifically for Power Manufacturing, LLC. will be used.<\/p>\n

** When S2 and\/or S3 are required, it must be specified on the inquiry and purchase order.<\/b><\/p>\n

S3. Permanent Grade Identification<\/b><\/p>\n

Permanent grade identification markers (S3) are utilized to readily identify the grade. The end of each anchor bolt above the concrete level requires a color code as follows:<\/p>\n

\n\n\n\n\n
\n

F1554 Grade 36<\/b>\"f1554-grade-36\"<\/p>\n<\/td>\n

\n

F1554 Grade 55<\/b>\"f1554-grade-55\"<\/p>\n<\/td>\n

\n

F1554 Grade 105<\/b>\"f1554-grade-105\"<\/p>\n<\/td>\n<\/tr>\n

<\/td>\n<\/td>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

When permanent grade identification is required, the end of the anchor bolt projecting from the concrete shall be steel die stamped. The grade identification markings are as follows:<\/p>\n

\n\n\n\n\n\n\n
\n

Grade<\/b><\/p>\n<\/td>\n

\n

Identification<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

36<\/p>\n<\/td>\n

\n

AB36<\/p>\n<\/td>\n<\/tr>\n

\n

55<\/p>\n<\/td>\n

\n

AB55<\/p>\n<\/td>\n<\/tr>\n

\n

105<\/p>\n<\/td>\n

\n

AB105<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

** When S2 and\/or S3 are required, it must be specified on the inquiry and purchase order.<\/b><\/p>\n

Mechanical Properties<\/b><\/h2>\n
\n\n\n\n\n\n\n\n\n\n
\n

Grade<\/b><\/p>\n<\/td>\n

\n

Size<\/b><\/p>\n<\/td>\n

\n

Tensile,
\nksi<\/b><\/p>\n<\/td>\n

\n

Yield, Ksi, min<\/b><\/p>\n<\/td>\n

\n

Yield, Mpa min<\/b><\/p>\n<\/td>\n

\n

Elong % min<\/b><\/p>\n<\/td>\n

\n

RA % min<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

36<\/b><\/p>\n<\/td>\n

\n

1\/4″-4″<\/p>\n<\/td>\n

\n

58 – 80<\/p>\n<\/td>\n

\n

36<\/p>\n<\/td>\n

\n

248<\/p>\n<\/td>\n

\n

23<\/p>\n<\/td>\n

\n

40<\/p>\n<\/td>\n<\/tr>\n

\n

55<\/b><\/p>\n<\/td>\n

\n

1\/4″-2″<\/p>\n<\/td>\n

\n

75 – 95<\/p>\n<\/td>\n

\n

55<\/p>\n<\/td>\n

\n

380<\/p>\n<\/td>\n

\n

21<\/p>\n<\/td>\n

\n

30<\/p>\n<\/td>\n<\/tr>\n

2-1\/8\u201d – 2-1\/2\u201d<\/td>\n\n

75 – 95<\/p>\n<\/td>\n

\n

55<\/p>\n<\/td>\n

\n

380<\/p>\n<\/td>\n

\n

21<\/p>\n<\/td>\n

\n

22<\/p>\n<\/td>\n<\/tr>\n

\n

2-5\/8\u201d \u2013 3\u201d<\/p>\n<\/td>\n

\n

75 – 95<\/p>\n<\/td>\n

\n

55<\/p>\n<\/td>\n

\n

380<\/p>\n<\/td>\n

\n

21<\/p>\n<\/td>\n

\n

20<\/p>\n<\/td>\n<\/tr>\n

\n

3-1\/8\u201d \u2013 4\u201d<\/p>\n<\/td>\n

\n

75 – 95<\/p>\n<\/td>\n

\n

55<\/p>\n<\/td>\n

\n

380<\/p>\n<\/td>\n

\n

21<\/p>\n<\/td>\n

\n

18<\/p>\n<\/td>\n<\/tr>\n

\n

105<\/b><\/p>\n<\/td>\n

\n

1\/4″-3″<\/p>\n<\/td>\n

\n

125 – 150<\/p>\n<\/td>\n

\n

105<\/p>\n<\/td>\n

\n

724<\/p>\n<\/td>\n

\n

15<\/p>\n<\/td>\n

\n

45<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n\n\n\n
Recommended Nuts and Washers<\/b>According to the ASTM manual, unless otherwise specified, all nuts used on these anchor bolts shall conform to the requirements of Specification A194 or A563. Nuts shall be of the grade, surface finish, and style for each grade and size of anchor bolt as follows:<\/p>\n
\n\n\n\n\n\n\n\n\n\n
\n

Grade<\/b><\/p>\n<\/td>\n

\n

Size<\/b><\/p>\n<\/td>\n

\n

NUTS – Plain<\/b><\/p>\n<\/td>\n

\n

NUTS – Galvanized<\/b><\/p>\n<\/td>\n

\n

Washers<\/b><\/p>\n<\/td>\n<\/tr>\n

\n

36<\/b><\/p>\n<\/td>\n

\n

1\/4″-1-1\/2\u201d<\/p>\n<\/td>\n

\n

A563A Hex<\/p>\n<\/td>\n

\n

A563A Hex<\/p>\n<\/td>\n

\n

USS, SAE, F436<\/p>\n<\/td>\n<\/tr>\n

\n

1-5\/8\u201d \u2013 4\u201d<\/p>\n<\/td>\n

\n

A563A Heavy
\nHex<\/p>\n<\/td>\n

\n

A563A Heavy
\nHex<\/p>\n<\/td>\n

\n

USS, SAE, F436<\/p>\n<\/td>\n<\/tr>\n

\n

55<\/b><\/p>\n<\/td>\n

\n

1\/4″ – 1-1\/2\u201d<\/p>\n<\/td>\n

\n

A563A Hex<\/p>\n<\/td>\n

\n

A563A Heavy Hex<\/p>\n<\/td>\n

\n

USS, SAE, F436<\/p>\n<\/td>\n<\/tr>\n

\n

1-5\/8\u201d \u2013 4\u201d<\/p>\n<\/td>\n

\n

A563A Heavy Hex<\/p>\n<\/td>\n

\n

A563A Heavy Hex<\/p>\n<\/td>\n

\n

USS, SAE, F436<\/p>\n<\/td>\n<\/tr>\n

\n

105<\/b><\/p>\n<\/td>\n

\n

1\/4\u201d – 1-1\/2\u201d<\/p>\n<\/td>\n

\n

A563D Hex1<\/sup><\/p>\n<\/td>\n

\n

A563DH Heavy Hex1<\/sup><\/p>\n<\/td>\n

\n

F436<\/p>\n<\/td>\n<\/tr>\n

\n

1-5\/8\u201d \u2013 3\u201d<\/p>\n<\/td>\n

\n

A563DH Heavy
\nHex1<\/sup><\/p>\n<\/td>\n

\n

A563DH Heavy
\nHex1<\/sup><\/p>\n<\/td>\n

\n

F436<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

1. A563-D rarely available, A563DH or A194-2H can be substituted<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

\u00a0<\/b><\/p>\n

PLEASE NOTE:<\/b><\/span><\/p>\n

Anchor Bolts & Hardware also available in the following Alloys: <\/b><\/span><\/p>\n

Type 304 SS\u00a0<\/b><\/span><\/p>\n

Type 316 SS<\/b><\/span><\/p>\n

Monel 400<\/b><\/span><\/p>\n

CDA-655 Silicon Bronze \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0\u00a0<\/b><\/span><\/p>\n","protected":false},"excerpt":{"rendered":"

Specifications\u00a0 F1554 was introduced in 1994. This is the newest fastener specification by the American Society for Testing and Material (ASTM). F1554 covers anchor bolts designed to anchor structural supports to concrete foundations. The chemical requirements, mechanical properties, and dimensional … Continue reading →<\/span><\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"open","template":"page-products.php","meta":{"spay_email":""},"jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/P8HaVP-47","jetpack-related-posts":[{"id":53,"url":"http:\/\/www.pwrmfg.com\/power-manufacturing\/all-products\/","url_meta":{"origin":255,"position":0},"title":"Table of Contents","date":"March 19, 2013","format":false,"excerpt":"\u00a0 \u00a0 Section 1 \u2013 Products Section 2 \u2013 Table of Contents & New Products\u00a0 Section 3 \u2013 Specifications 03A- Specifications For Stainless Steel Bolts, Nuts, Washers, and Cast For Pole Line Hardware 03B - Standard Specification for Stainless Steel Wire Strand 03C - The Care and Cleanings Of Stainless\u2026","rel":"","context":"Similar post","img":{"alt_text":"Power manufacturing heading","src":"https:\/\/i1.wp.com\/www.pwrmfg.com\/power-manufacturing\/wp-content\/uploads\/2013\/03\/Power-manufacturing-heading.png?resize=350%2C200","width":350,"height":200},"classes":[]},{"id":6,"url":"http:\/\/www.pwrmfg.com\/power-manufacturing\/specialty-bolt-products\/","url_meta":{"origin":255,"position":1},"title":"Specialty Bolt Products","date":"March 12, 2013","format":false,"excerpt":"\u00a0 \u00a0 \u00a0 \u00a0 \u00a0 Power Manufacturing, LLC. is a manufacturer with the ability to custom fabricate your bolt and fastener requirements at a moment\u2019s notice to ensure the fastest response time available. Power Manufacturing, LLC. provides complete inspection, full traceability with lot control & certifications available. For more information\u2026","rel":"","context":"Similar post","img":{"alt_text":"Power manufacturing heading","src":"https:\/\/i1.wp.com\/www.pwrmfg.com\/power-manufacturing\/wp-content\/uploads\/2013\/03\/Power-manufacturing-heading.png?resize=350%2C200","width":350,"height":200},"classes":[]},{"id":764,"url":"http:\/\/www.pwrmfg.com\/power-manufacturing\/fasteners\/screw-eye-bolts\/","url_meta":{"origin":255,"position":2},"title":"Screw Eye Bolts","date":"March 24, 2015","format":false,"excerpt":"Please Note: EYE RODS \/ EYE BOLTS:\u00a0Eye Bolts and Anchor Rods will not look exactly like catalog drawings. Generally all eyes will be investment cast or forged tear drop oval eye or thimble eye shaped nuts attached to double end stud or rod and be a little larger than the\u2026","rel":"","context":"Similar post","img":{"alt_text":"07-Fasteners-image-10","src":"https:\/\/i1.wp.com\/www.pwrmfg.com\/power-manufacturing\/wp-content\/uploads\/2013\/03\/07-Fasteners-image-10.jpg?resize=350%2C200","width":350,"height":200},"classes":[]},{"id":743,"url":"http:\/\/www.pwrmfg.com\/power-manufacturing\/oval-eye-bolts\/","url_meta":{"origin":255,"position":3},"title":"Oval Eye Bolts","date":"March 24, 2015","format":false,"excerpt":"Please Note: EYE RODS \/ EYE BOLTS:\u00a0Eye Bolts and Anchor \u00a0 \u00a0 Rods will not look exactly like catalog drawings. Generally all eyes will be investment cast or forged tear drop oval eye or thimble eye shaped nuts attached to double end stud or rod and be a little larger\u2026","rel":"","context":"Similar post","img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":751,"url":"http:\/\/www.pwrmfg.com\/power-manufacturing\/fasteners\/double-arming-eye-bolts\/","url_meta":{"origin":255,"position":4},"title":"Double Arming Eye Bolts","date":"March 24, 2015","format":false,"excerpt":"Please Note: EYE RODS \/ EYE BOLTS:\u00a0Eye Bolts and Anchor Rods will not look exactly like catalog drawings. Generally all eyes will be investment cast or forged tear drop oval eye or thimble eye shaped nuts attached to double end stud or rod and be a little larger than the\u2026","rel":"","context":"Similar post","img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":54,"url":"http:\/\/www.pwrmfg.com\/power-manufacturing\/manufacturing-specifications\/","url_meta":{"origin":255,"position":5},"title":"Manufacturing Specifications","date":"March 19, 2013","format":false,"excerpt":"\u00a0 SPECIFICATIONS FOR STAINLESS STEEL BOLTS, NUTS, WASHERS, AND CAST OR FORGED POLE LINE HARDWARE 1.0 General: 1.1 This specification covers the requirements for stainless steel bolts, nuts, washers, and cast or forged pole line hardware to be used on Transmission and Distribution Systems. The products and alloys specified are\u2026","rel":"","context":"Similar post","img":{"alt_text":"","src":"https:\/\/i1.wp.com\/www.pwrmfg.com\/power-manufacturing\/wp-content\/uploads\/2013\/03\/03-mfg-spec-table-1-b.jpg?resize=350%2C200","width":350,"height":200},"classes":[]}],"_links":{"self":[{"href":"http:\/\/www.pwrmfg.com\/power-manufacturing\/wp-json\/wp\/v2\/pages\/255"}],"collection":[{"href":"http:\/\/www.pwrmfg.com\/power-manufacturing\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"http:\/\/www.pwrmfg.com\/power-manufacturing\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"http:\/\/www.pwrmfg.com\/power-manufacturing\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"http:\/\/www.pwrmfg.com\/power-manufacturing\/wp-json\/wp\/v2\/comments?post=255"}],"version-history":[{"count":18,"href":"http:\/\/www.pwrmfg.com\/power-manufacturing\/wp-json\/wp\/v2\/pages\/255\/revisions"}],"predecessor-version":[{"id":1342,"href":"http:\/\/www.pwrmfg.com\/power-manufacturing\/wp-json\/wp\/v2\/pages\/255\/revisions\/1342"}],"wp:attachment":[{"href":"http:\/\/www.pwrmfg.com\/power-manufacturing\/wp-json\/wp\/v2\/media?parent=255"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}